Dev Board Toolkit

Pinouts, wiring, key matrix

$9.99 · Designed for iPad. Not verified for macOS.

Pick a board, add your parts and get valid pins, conflict checks, a wiring diagram, a power budget and starter code. Plans hand-wired keyboards too. Offline. Pay once. Dev Board Toolkit plans microcontroller projects. Pick a board, add your sensors, displays and parts, and it finds pins that work, checks for conflicts, draws the wiring and writes the pin set-up code. It also plans hand-wired keyboards, from layout to matrix to QMK and ZMK configuration. BOARDS • Pin maps drawn from the maker's own documents, with every pin's functions and cautions: boot and strapping pins, input-only pins, ADC2 with Wi-Fi, flash and PSRAM pins, USB pins, NFC pins, 5 V tolerance • Wireless and USB facts: Wi-Fi standard and bands, Bluetooth Classic and LE, Thread, Zigbee, Matter, ESP-NOW, LoRa, native USB and HID • Board finder: filter by radio, USB HID, free pins, ADC pins, battery charger and more • Compare up to three boards side by side • Every fact lists its source document PIN PLANNER • Add modules and parts; pins are assigned automatically, and you can lock or move any of them • Conflict checks: I²C address clashes, SPI chip selects, strapping pins, input-only pins, pins that toggle at boot, current limits • Wiring diagram in jumper-wire colours: red power, black ground, yellow SDA, green SCL, blue SPI • Starter code: C++ sketch (Arduino IDE), MicroPython, CircuitPython and ESPHome YAML • Pin table and parts list as CSV, wiring diagram as PDF or SVG, a wiring checklist and a project PDF LED ON A PIN • Series resistor at the pin's real logic level, snapped to E12 or E24 • Pin and total current against the board's limits, transistor drive when a pin can't supply it, and a warning when a blue or white LED has too little headroom on 3.3 V KEYBOARD PLANNER • Presets or KLE import; splits, ortho layouts and macropads • Rows × columns for your controller's free pins, diode direction, encoders, OLED, RGB with a brightness cap for the USB budget • Trackpads and trackballs: Cirque and Azoteq trackpads and PMW3360 sensors, with their bus, interrupt and reset pins • Generates configuration for QMK and ZMK firmware, a plate SVG and DXF, keycap counts and a hand-wiring checklist POWER, LEDS AND BUSES • Power budget from your parts, regulator heat, battery life with sleep • Addressable LED strips: current, power injection, wire gauge, data level shifting • I²C address finder, pull-up sizing, UART baud error, SPI wire length LIBRARY AND BENCH • About 100 modules: sensors, displays, radios, drivers, level shifters, LEDs, audio, power • Maker library: components and their pin orders, connectors, protocols, power, reference tables and short how-tos • Ohm's law, LED resistor, divider, RC, colour codes, SMD codes, E-series, wire gauge, units Works with boards such as Raspberry Pi Pico and Pico 2, Raspberry Pi 4, Arduino Uno, Nano, Mega and Leonardo-format boards, ESP32, ESP32-S3, C3 and C6 DevKits, Seeed XIAO, Pro Micro-format and nice!nano-format controllers, Adafruit Feather and QT Py, Teensy 4.x, STM32 Black Pill and more. Trademarks belong to their owners; this app is not made or endorsed by them. Projects keep the board, parts, pin plan, power plan, keyboard plan, notes, photos and checklists, and export as a .devboard file. Works offline. No account, no ads, no tracking. Check every plan against your board's silkscreen and datasheet before you power it. Low-voltage DC only; the app does not cover mains wiring.

Ratings & Reviews

  • This app hasn’t received enough ratings or reviews to display an overview.

The developer, Nerd Alchemy LLC, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Not Collected

    The developer does not collect any data from this app.

    Privacy practices may vary, for example, based on the features you use or your age. Learn More

    Accessibility

    The developer has not yet indicated which accessibility features this app supports. Learn More

    Information

    Seller
    Nerd Alchemy LLC
    Size
    12.4 MB
    Category
    Developer Tools
    Compatibility
    Requires iOS 26.0 or later.
    • iPhone
      Requires iOS 26.0 or later.
    • iPad
      Requires iPadOS 26.0 or later.
    • Mac
      Requires macOS 26.0 or later and a Mac with Apple M1 chip or later.
    • Apple Vision
      Requires visionOS 26.0 or later.
    Languages
    English
    Age Rating
    4+
    Copyright
    © 2026 Nerd Alchemy
  • Privacy Policy

    • Supports

    • Family Sharing

      Up to six family members can use this app with Family Sharing enabled.

    More by Nerd Alchemy LLC