New • Service Package Display. Added support to properly display Lite plan and self-monitoring plans in the packages section when selected from the portal Fixes & Imrovements • Plan Selection Access. Implemented workaround to display $0 plan selection when no plan is selected, ensuring installers maintain full access to all plan management controls • Package Icons. Added visual indicators for Lite and Trial plan types in the Installer app for easier identification • General Improvements. Overall performance optimizations and stability enhancements

Fixes : • MyQ Garage Door Integration: Resolved multiple issues with adding and configuring myQ Garage Door Openers, including wizard hanging during setup, plugin installation failures, and authentication flow problems. The integration process is now more reliable and consistent across different scenarios. • Sensor Configuration: Fixed an issue where sensor group changes were not being saved properly in the iOS Installer app. Sensor group assignments can now be set and saved as expected. • Device Pairing Wizard: Corrected display of installation instructions in the myQ Garage Door wizard to ensure the proper guidance is shown for each device type. Improvements : • General performance and stability enhancements across device integration workflows • Improved reliability for plugin installation and configuration processes • Enhanced error handling and user feedback during device setup

Improvements: - Standardised Water Valve Icon Color The color of the Water Valve icon in the "Add New Device" section of the Installer App has been corrected to be consistent with other device icons. - Enhanced Reliability for Device Group Settings For our installers, device group settings are now more robust. The app ensures that when a setting is changed, the complete configuration is always saved correctly, preserving the integrity of the setup and all associated devices. - Accurate Entry Delay Display The Installer App now displays the precise entry delay value for sensor groups, ensuring installers have the correct information at a glance during setup. - Full Access to 'Unit Settings' on iOS Our installers can now access and manage the 'Unit Settings' page without interruption on the iOS Installer App. This allows for complete hub configuration, including time zone setup, directly from an iOS device. - Smoother 'Add Camera' Wizard When adding a new camera, the user interface now provides clearer feedback and prevents multiple submissions. This ensures a smoother setup process without confusing messages.

ONVIF camera onboarding – Added support for onboarding ONVIF cameras, enabling users to connect and manage compatible devices.

Improvements to the Honeywell device setup wizard

Added Device Pairing Wizards for Savvi Siren R7051-V2, Ecolink Siren ISZW7-ECO and Ecolink Wireless Translator WST802 Heat, Intrusion, Gas, and Tilt sensors can now be added to Sensor Groups. Icons for Intrusion, Gas, and Tilt sensors have been restored. Sensor groups in the iOS Security Installer are now ordered by number.

Added internal updates related to sensor groups. These are pre-requisites for a future feature update dependent on components in the linux firmware.

Honeywell T10 Wifi Thermostat is now fully integrated

Fixed issue where the 2GIG-PIR1-345 motion detector incorrectly displayed as armed on the disarmed page. The doorbell configuration page is now accessible in the iOS installer app for easier troubleshooting. Handled a scenario where new cloud calls were made with invalid authentication tokens. A recommended section of groups now appears at the top based on device category and subcategory, with all groups selectable in other sections. Group names are now searchable by name. A confirmation popup now appears when assigning a non-recommended group to a sensor.

Added a fix for Onvif cameras not streaming on iOS. Fixed issue where countdown timer stops when the app is moved to the background. Scan barcode screen now closes as expected after security device inclusion. Fixed issue in Swidget Plugin where text color was not changing based on air quality value. Added blank space between value and scale and changed text color based on CO2 level sensor value. Added a space between value and scale and changing "iaq" to "IAQ" for Swidget Air Quality Sensor. Added space between value and scale and changed scale from "parts_per_billion" to "ppb" for Swidget Volatile Compound sensor. Added space between value and scale for Swidget Pressure sensor.

New COPS Monitoring is now a fully integrated Professional Monitoring provider Settings menu updated to reflect options particular to the selected monitoring provider. Activate Service: Fields now dynamically displayed for selected provider. Fixes & Improvements Fixed condition incorrectly allowing the installer to start Walk Test mode during exit countdown. Fixed condition incorrectly allowing the installer to start Walk Test mode while system is armed.

New and Improved Alerts and events History A new design and API for alerts have been implemented, providing an improved user experience. Smoke and CO detected alerts are now displayed correctly in Alerts. When switching to the past date and back to the current, Alerts are no longer shown empty. Camera motion detected events are now properly displayed. Solved an issue where the Walk test screen would not load correctly in the Installer App. The CLEAR button will no longer show previously tested devices as PASSED, providing accurate test results. Face and human detection capabilities are now available for the VC703, VC1103, and VC1203 Ezlo cameras. Fixed some app crashes happening during wireless onboarding. Test mode begin/end time now correctly matches account timezone. Test Mode start/end time and date are now displayed properly when Test Mode is enabled. Fixed an issue where the user address was not displayed properly in the Security Installer App. Fixed an issue where the user could move camera livestream frames in the Security Installer App. Short delay can be set on Sensors Groups menu in the Security Installer App. Addressed issue with two-way audio functionality not working correctly in the Installer App. The Installer App now allows login by partner user, enhancing user experience.

Resolved issue where timezone could not be set when configuring a new controller via the Installer app on iOS, requiring a force close to function properly.

Features Local streaming for cameras - Improved camera streaming experience over the local network Sensor Walk Test - now it's a lot easier to test and confirm the sensors are operating correctly Pin Codes V2 - Improved Pin Codes Management 2GIG Panic Button is now fully supported Fixes & Improvements Multiple timeline UI updates and improvements Fixed condition causing timeline/history to not be updated unless you exit and re-enter the screen Fixed issue about the Share function for the recordings Addressed condition when no chime could be heard on the Dashboard Re-added "Long Extended Delay" option in the configuration menu Corrected behavior for sensor arm state be independent between Arm/Disarm modes

New features: - Manual network test - Implemented the ability to test and confirm a good network connectivity of the system

New Features: Enhanced Group Delay Configuration: Users now have the ability to customize time settings for each group delay type WebRTC Infrastructure update: We're excited to introduce an update over WebRTC protocol, bringing improved real-time communication capabilities, enhanced stability, and security measures to ensure a seamless user experience.

Generic 345 MHz sensors categories added for ease of installation Default Entry Delays and Sensor Groups Help and diagnostics info made available on Installer app

Fixed a bug about missing icon in wireless camera pairing process Added ability to pair Generic 345 Mhz devices based on device type Added multiple DNIS (Receiver ID) selection while activating CMS for customer Added chime selection option for individual sensors.

Fixed issue causing the Installer app to get stuck on the splash screen. Resolved crash in Protect app when accessing sound settings in Controller Siren under Devices.

- Accessing Resident account on behalf of resident is now restricted with permission from resident himself - Added activation option for cellular backup plan - Fixed issue with Doorbell camera not going back to Devices when in fullscreen - Security Settings Menu re-organized

Fixed AccountID validation algorithm for Professional Monitoring

Hotfix: Fixed a crash that appeared when changing network settings

Added Device Pairing Wizards for generic 345MHz devices Entry delay duration is now configurable Fixed issue for name validation when setting up professional monitoring Fixed issue with keyboard staying open in the Device Pairing Wizard on swipe down Fixed design issue, making the text easier to read on “Choose Your Controller” screen Fixed issue with Network settings menu being hidden Fixed issue with Doorbell camera not scaling to full screen Implemented flow for CMSN integration

Hot Fix: Updated security modes entry delay from fixed to variable

- Improved Hub onboarding flow over Wifi - Improved customer onboarding flow, syncing the resident location with the hub - Fixed issue with in-app doorbell notification - Fixed issue with 2-way audio - Security Settings optimizations - Fix: Cannot change unit name - Fix: Cannot logout - DPW categories incomplete after onboarding a controller - Implement plans screen