- Apple Watch support with timer, wind, and dry fire mode - Introduced v2 ballistics engine brining better initial solutions for modern bullets. - Refined Aerodynamic jump model (v2 engine), added AJ column and AJ off setting - Added per-profile cloud-sync indicator with a last-synced tooltip.

- Reverted the engine v2 notice and migration path

- Fixed an issue that could cause the auto wind direction to appear locked at 12:00

- Discontinued support for two specific weather devices

- Added a redesigned Environment page with selectable data sources: manual entry, weather station, and connected device. - Added a dashboard environment indicator that shows at a glance whether your environmental data is good, needs review, or missing, and dims as readings get old. - Added the ability to pull altitude from GPS in any environment source mode, with alerts for low-accuracy or unusual GPS altitude readings. - Added the ability to rename targets and choose a numeric or alphabetic target ID style. - Added a long-press on the elevation cell to set your dialed elevation. - Improved automatic weather by correcting readings to the set altitude and flagging values that look off for review before they are used. - Added target shapes and a shape column, with matching shapes between the app and EZ Sign and eDOPE cards. - Improved manual wind mode by making the selected W1-W5 column the center value in the wind clock. - Improved recovery for stalled Calypso wind streams so it reconnects on its own without a manual rescan. - Fixed an issue that could let the app quietly fall back to a default barometric pressure when an environment source dropped out, which could produce incorrect elevation at altitude. - Fixed an issue where truing ignored the profile's zero offset, so a saved zero had no effect on the solution. - Fixed an issue that caused truing numbers to be off when the solved zero included an elevation offset. - Fixed an issue that caused certain Calypso devices to lose connection. - Fixed an issue on Android where the Calypso would not automatically reconnect after toggling Bluetooth or restarting the app. - Fixed an issue that caused columns to run together with no spacing in mirror mode.

- Resolved an issue that would cause distances in meters to drop by 1 - Resolved an issue that would prevent targets from being entered in meters - Resolved an issue that caused wind units to be changed when changing distance units - Resolved an issue that caused the manual wind interval to get reset when swapping screens - Removed option for lifetime purchase

- Resolved an issue that would cause distances in meters to drop by 1 - Resolved an issue that would prevent targets from being entered in meters - Resolved an issue that caused wind units to be changed when changing distance units - Resolved an issue that caused the manual wind interval to get reset when swapping screens

- Fixed an issue that caused the EZ Sign and EDOPE cards to not obey selected units - Fixed an issue that caused the windage zero offset to be reversed - Improved WA (Wind Average) column results by linking it to the average direction indicator

- Fixed an issue that prevented the number pad from dismissing when typing in the mover speed calculator window on iOS. - Fixed an issue that caused elevation to display 2 decimal places on the EZ Sign and EDOPE when 0.1 rounding was enabled. - Fixed an issue where the Force MOA Rounding button was present but had no effect when pressed.

Improved manual wind mode by making the starting column selectable across W1–W5. Improved the EZ Sign card by making the pen tip width adjustable. Added a cancel button to Send to EDOPE and EZ Sign. Added an EZ Sign settings button inside the Show/Write EZ Sign Card window. Fixed an issue that caused rendering problems in the column editor when screen zoom was applied. Fixed an issue that prevented EZ Sign 2-color 2.9" from rendering properly. Fixed an issue that could reset EZ Sign columns to default unexpectedly. Fixed an issue on iOS where the number pad covered the Done button when tapping the set W1 speed mph text box.

- Added support for EZ Sign card e-ink devices - Added support for eDOPE cards - Fixed an issue that could cause manual wind columns to not update

- Improved performance of drag curve generation - Improved CPU performance - Added range finder support for Vector X - Added wind average reset button for Calypso - Added support for DROP D3 and WeatherDot

- Fixed an issue that could cause Hunter mode to reset back to 1000 yards when switching between tabs. - Fixed an issue that could cause the account default range setting to incorrectly limit the maximum range available in Hunter mode. - Fixed an issue that could cause users to get stuck in Unit Settings without a way to navigate back. - Improved mover speed field sizing so values remain readable when large text mode or larger device font settings are enabled. - Fixed an issue that could cause manual wind speed calculations to fail for locales that use a comma as the decimal separator. - Improved DoF capture defaults by setting Inclination to off by default and adding an account setting to control the preferred default behavior. - Improved the DoF capture layout to reduce overlap and make the capture window easier to read on smaller screens. - Fixed an issue that caused the Generate DOPE Card W1–W5 wind editor flow to fail or behave inconsistently on iOS. - Fixed an issue that rounded displayed DOPE card wind-speed labels instead of showing the exact values used in the calculation.

- Improved Vector X saved-device status and reconnect presentation so idle states read more clearly. - Added a Default range setting in Account Settings. - Added slider-assisted target range editing in target and match workflows. - Simplified the Truing screen by removing duplicate add-point controls. - Added a Generate DOPE Card Default range setting in Account Settings. - Expanded mover speed box which prevented proper rendering on some devices - Reduced spacing between wind columns when .1 rounding is enabled - Fixed iOS DOPE card keypad dismissal by adding a reliable keyboard accessory action

- Improved Calypso reconnect handling during scans and when saved devices reappear. - Added stronger recovery for stalled Calypso wind streams. - Improved scan-progress and reconnect-status feedback. - Reduced stale or misleading startup connection errors on iOS. - Offline sessions are now preserved more reliably at startup when connectivity is unstable. - Added Mach display support in environment readouts where supported. - Improved solved-zero behavior by using the rifle profile's zero range as the default starting point. - Fixed manual wind slider display units. - Fixed G1 solved-zero handling. - Overall stability and workflow improvements for cleaner field use.

- Added a new lifetime upgrade flow in Account for easier subscription changes. - Improved Kestrel discovery and unknown-device handling for more reliable pairing. - Refined Coriolis behavior with target-azimuth support and older payload fallback. - Bug fixes and overall performance improvements.

- More reliable live wind updates: Wind readings now stay current even when sensors send similar packets, so connection status and wind values refresh more consistently. - Stronger Bluetooth stability: Connecting to Kestrel, WeatherFlow, or VectorX is now less disruptive and better preserves active wind device connections. - Cleaner Hunter mode experience: Manual wind in Hunter mode now focuses on the primary wind input (W1) for a simpler, clearer workflow. - Better Hunter layout flow: Energy/range status presentation was reorganized to make key shot decisions easier to read at a glance. - General performance and bug fixes: Additional under-the-hood improvements for smoother day-to-day use.

Bug Fix: Fixed an issue that caused manual wind to not populate in Target mode. Improvement: Updated Target mode columns to have the same fields as Comp mode. Improvement: Updated Dialed Elev and Dialed Wind input box behavior.