• Try it in 3 steps: look at a sample pole, measure one near you, and get it checked free. • Measured a pole in Try it? Tap "Get this pole checked" and we email you the result. One free pole per email address. • Two-photo pole height (iPhone Pro models): a close-up of the base, then step back for the whole pole, then an optional angle photo. Drag the Base and Mark markers onto their spots. • Camera coaching: hints to fill the frame, the photo waits until the phone is steady, and a quick check flags blurry or dark photos so you can retake them. • Request company access right in the app. • Heights in the demo are calculated by Macrilon from the photos.

- First launch now opens straight into Try it: no sign-in screen, and no keyboard popping up. - Demo poles now label each height as either a hot stick measurement or a Macrilon estimate. - "Request company access" now also appears below the demo poles. If the request can't be sent, the app opens a ready-made email to us instead. - Fixed a false "Access denied" message that could appear on some job lists.

- New: "Try it without an account" on the sign-in screen. Explore a sample job and measure a pole near you. Nothing you do in Try it is uploaded, and it is deleted when you leave. - 32 languages (beta): the app follows your phone's language. - Metric jobs show metres throughout. - Outside the US, clearance labels say "US standard (NESC)". - Wording fixes, including Swedish.

- Ruler: if the ground point won't register (e.g. on grass), after a few tries you can place the base manually. It's labeled "Manual base" wherever it's used. - Pole class: enter a custom class (e.g. B2) instead of picking from a fixed list. - A "Power space" prompt replaces "Equipment"; a close-up photo is still requested when needed. - If a pole tag or birthmark is missing or unreadable, you can enter the GLC instead. - Hot stick: enter the stick reading right after the whole-pole photo. - "Where am I?": a nearest-job button now appears on the job list. - A warning appears before you capture into a demo/test job, so it's harder to do by accident. - That warning now only asks once per session: tap "Yes, this is a test" and it won't ask again until you reopen the app.

Languages - The app now speaks 30 languages besides English. German and Japanese join Spanish, French (Canada) and Portuguese (Brazil), plus 25 more. The app follows your iPhone language; to change it, open iPhone Settings > Macrilon Field > Language. Arabic reads right to left. - All translations are beta. Use ••• > Report wording to flag a line that reads wrong. Localization - These 25 additional languages are beta machine translations without native-speaker review: Arabic, Bulgarian, Croatian, Czech, Danish, Dutch, Estonian, Finnish, Greek, Hindi, Hungarian, Indonesian, Italian, Latvian, Lithuanian, Malay, Polish, Romanian, Slovak, Slovenian, Swedish, Thai, Turkish, Ukrainian, Vietnamese. Metric jobs - The pole survey asks in cm and m on metric jobs, and a decimal comma works (7,3). Imperial jobs are unchanged. Planned poles - If you type a pole ID over a planned pole, the app tells you before Save that the photo stays on that planned pole and your typed ID goes to the office as a note. Not this pole? Tap Different pole. - Offline, a saved planned job opens view-only on the Map; pick poles in the List. Photos - Under a photo, Found on this photo lists what the app marked on it. Tap Not here for anything that is not really there; it stops showing for you and helps the app learn. Directions - Directions open Google Maps on every phone. You can still pick Apple Maps in ••• > Account. Also - Long job lists show every job (they stopped at 30 before). - Upload retry and reliability fixes. - Ruler and photo heights remain estimates: not for clearance, design or construction decisions.

Map and List - A new Map with pole symbols and colors for what's left to field, done, or needs a look. Tap a pole for its card: Field this pole, Street View, Directions. - A new List: one card per pole, filtered To field / Done / Needs a look. Capture - Wire span photo in two steps: pick the span on a small map, then say what it crosses. - New Ground wire tile (photo, or None if there isn't one). - Add more than one photo on a tile; the tile shows how many. - Field checklist: vehicle access, replacement mark, poles at the spot, vegetation, guy gauge, anchor details, span length and bearing, and ground-line circumference when a pole has no tag and no birthmark. Languages - French (Canada) and Portuguese (Brazil) join Spanish as beta languages: choose one in ••• > Language, or keep Phone language. Ruler - Each height shows where it came from. Ruler and photo heights are estimates: not for clearance, design or construction decisions. Also - Dark mode and large text on the new screens, plus fixes and improvements.

Fewer taps per pole - Whole pole, guy wire, equipment and surroundings photos now save by themselves. Tap Add another to take one more; the photo you already have is kept. - Saving no longer waits for GPS. If your location is rough, the photo still saves and is marked approximate. - The count always reads n/7, and the next photo stays on screen above GO. - No guy wires or no equipment on a pole? Tap None once, no photo needed. None on Guy wires also completes Anchors. - New optional Comm tags tile: take close-ups of the tags on communication cables, type the owner if you can read it, or tap None. It does not change the n/7 count. - New span crossing type: Over roadway - vehicles pass under. - "Pole stamp" is called Birthmark again (the pole's stamped length and class). Ruler (iPhones with LiDAR) - A magnifier, now 50% bigger, shows exactly where your finger is when you tap the pole base. Slide to adjust, lift to set. - If a base tap isn't accepted, the Ruler tells you what to do, such as "Step closer" or "Hold still". You can always take the photo without a Ruler height. - The base and height marks stay on screen when you step back more than about 26 ft from the pole. Poles and map - A wire span or surroundings photo taken away from the pole stays on that pole. It no longer starts a new pole. - GPS never switches your pole on its own. If a pick from the list can't go through, the app tells you why and offers to take you back to your pole. - The map shows the SCID of each planned pole. Estimated span lengths are no longer shown. Language - Español (beta): choose it in More > Language, or keep Phone language to follow your iPhone's setting. Also - More > About shows the app version and build number. - Fixes and behind-the-scenes improvements.

- Fewer taps per pole: whole pole, guy wire, equipment and surroundings photos save by themselves. A short "saved" line offers Retake. - Save no longer waits for GPS. A rough location still saves and is marked approximate. - Ruler (iPhones with LiDAR): a magnifier shows exactly where you're tapping the pole base, and if a tap isn't accepted the Ruler tells you what to do ("Step closer", "Hold still"). - New quick question after a Ruler photo: "Tap where the pole meets the ground". It never blocks you: tap Skip, or Base hidden if you can't see the base. - The whole-pole photo is never blocked. If the Ruler can't read the ground, the photo still saves without a Ruler height. - Fixes.

- New capture board: every photo for a pole on one screen. The next photo is lit up; tap GO to take it. - Clearer names: Pole tag, Pole stamp, Guy wires, Anchors, Wire span, Surroundings and Office request. - Guy wires and Anchors have their own tiles. Answer once, photograph each anchor and pick its rod size. - Equipment chips: tap what is on the pole, shown with full names. Read the transformer rating from its plate. - Planned poles show their SCID. Pick one and its SCID fills in the Pole ID. - Ruler (iPhones with LiDAR): easier steps. Walk up to the pole, tap its base, then step back to fit the whole pole. - The whole-pole preview now shows the entire pole. - Shorter camera instructions, and fixes.

• Whole-pole camera: fit the whole pole with its top below the guide line and its base at GROUND. The Macrilon logo shutter sits on the right edge of every camera. • Ruler (iPhones with LiDAR): your base tap is checked. A base read from too far away or with unclear depth is refused, and the app tells you what to do instead. • Birthmark: after the birthmark photo, tap the pole length on the stamp and the class, or "Can't read the birthmark". • Pole tag: the tag number, the company on the tag and "This company owns the pole" come up right under the tag photo. • Equipment: Transformer bank added; 37.5 and 75 kVA are standard choices; a "Take the transformer photo" button sits under the hint. • Comm lines: one question. Add Fiber, CATV or Telco lines with their owners; owners carry over to your next pole on the same job. • Flags and warnings: Flag, Pole not in field and Warning, each with its own note. Warnings use the crew's condition lists and include make-ready violation types. • Height: "What did you measure?" (Neutral by default). • Pinch to zoom on close-ups. The whole-pole photo always stays at 1x. • Retake keeps the birthmark reading and anchor rod answers of the photo you kept. • An answer the phone could not store retries by itself; "Not saved yet" shows until it is stored. • Photos on this phone (works with no signal): see what is waiting, uploaded or failed. • Pole names lead with the pole tag. Map colours show what has been fielded. • Navigate opens directions to a pole; Street View opens Google Maps at the pole. Locate me tells you when Precise Location is off. • Go-backs: when your office asks for a pole to be re-shot, it shows in the List, on the Map and on Capture, with Mark collected. Offline downloads include them. • Full-size and RAW photo copies when your office turns them on. Signing out now tells you before unsent RAW copies are deleted and asks you to confirm. • Try new designs (More menu): a practice area for upcoming layouts. Nothing in it is saved or sent. • Fixes: the Map and List redraw when you change jobs; Street View and Navigate open correctly.

• Shot buttons for Pole, Span and Context. For a span, turn on "This span is a drop" and pick Secondary service or Communication drop. • "Pole markings" is now called "Birthmark". • A question for each pole: any equipment on this pole? Pick from Transformer, Cutout arrester, Lightning arrester, Riser, Streetlight, Capacitor, Recloser or TBD. Choosing Transformer opens the camera for a side photo of it. • Companies you enter are remembered for the whole job, and each line can have its own owner. • Locate me waits for a good GPS fix and tells you when the GPS signal is weak. • Ruler (iPhones with a LiDAR scanner): after you touch the base of the pole, tap the pole again higher up (head height) so the marks follow its lean. Tall marks every 4 ft up to 34.5 ft. • Fixes and speed improvements.

• A simpler capture screen. Each pole has three photo tiles: the whole pole with the stick, the tag, and the pole markings. Use Extra photo for anything else. • "Can't reach this pole": pick the reason and save it in one step. • Three tabs: Capture, List and Map. Upload status is at the top of the screen; tap it to see what is waiting. • Forgot password? Request a reset link from the sign-in screen. • Ruler (iPhones with a LiDAR scanner): marks every 4 ft from 2.5 ft up to 34.5 ft. Touch the base of the pole up close, then step back to fit the pole in the picture. • A question for each pole: any guys or anchors? If yes, take the anchor photo and pick the anchor rod size. • The job list opens faster, and after you sign in, your jobs download so they are ready offline. • The separate height photo button is gone: the whole-pole photo with the stick is the height photo. • Fixes for signing in on slow networks and for working offline after the app restarts.

• Ruler (iPhone models with a LiDAR scanner): touch the foot of the pole and height marks at 2.5 ft and 6.5 ft, and 10.5 ft when it is on screen, are saved with the photo. They are an on-phone check, not a surveyed height. • The map pin can move from where you are standing to the pole face. • Stick photo is still there for the physical stick and for phones without LiDAR. • New: a scale bar on the map, and hardware labels on uploaded photos are easier to read. • Fixes: taking photos after the app is reopened with no signal; the location line on larger iPhones; the pole list and map show when crew data was last updated; taking a photo works reliably on iPhones without a LiDAR scanner. • After updating, open the job list once with signal and download your jobs again so they work offline.