- Dark mode is now supported across the app. - New color and color-temperature controls for smart bulbs. - Smart thermostat controls now work reliably in every mode. - Camera live view, playback, and setup are smoother. - Camera firmware updates can now be viewed and applied from the app. - New step-by-step NFC tag shortcut wizard. - Watch app displays more panel types, partitions, and zones. - Scene builder is smoother and more accurate across partitions. - Notification delivery and appearance are more consistent. - Numerous stability improvements and bug fixes.

- Improve camera handling of push notifications on cold starts on certain cameras. - Resolved identification and handling issues on certain panels. - Fixed some bugs with the messenger and notifications. - Fixed a "Disarming..." indicator that could remain on screen after the system had disarmed. - Improved camera/doorbell support on certain devices. - The watch app now supports zone statuses. - Fixed an incorrect orange settings indicator on certain cameras until the SD Card screen had been opened. - Fixed a sensor zone occasionally listing the same state twice (e.g., "Tampered | Tampered"). - Activating or deactivating a scene on a multi-partition panel no longer resets the scene to partition 1. - Scanning certain non-validated cameras now shows a clearer prompt with options instead of failing partway through pairing. - Added motion tracking support for compatible cameras where the feature was missing. - Fixed several issues on multi-partition systems, including incorrect arming options and zones disappearing when switching partitions. - Improved sync of arming state and user permissions when returning to the app. - Reduced flicker and faster app launch on accounts with multiple systems. - Fixed a spurious "Failed to grant access" message when adding a user. - Fixed a rare crash when handling push notifications. - Disabled partitions are no longer shown on device, zone, and scene cards. - Improved the camera Event Reporting toggle with a loading indicator while changes apply. - Misc. bug fixes and improvements.

- Improved NFC support where applicable. - Added partition and cancel/confirm support in the watch app. - Improved sensor support for Open/Close scene triggers. - Added momentary open hardening. - Improved System Arming Level triggers to better support different panel types. - Improved live view aspect ratio support. - Various UI and prompt tweaks. - Added camera battery indicator where supported. - Fixed username sync issues. - Fixed some camera timezone issues. - Resolved issues between user sessions. - Fixed Zone notification device name not showing in notification title. - Resolved localization and notification issues. - General crash hardening. - Misc. bug fixes and improvements.

- Fixed some localization issues. - Fixed some camera aspect ratio issues. - Resolves some motion detection setting issues. - Adds some motion detection event context info where applicable. - Misc. bug fixes and improvements.

- Zone bypass prompt should now show where applicable during arming sequences. - Misc. bug fixes and improvements.

- Misc. bug fixes and improvements.

- Misc. bug fixes and improvements.

- Activity/Ignore/Privacy zone support has been improved on certain camera models. - PTZ support is now blocked on certain models when a privacy zone is active. - PTZ Calibrate/Home setting should now work where supported. - PTZ on certain camera models should now work by holding the buttons. - Improved support for larger accounts. - Misc. bug fixes and improvements.

- Resolved a doorbell enrollment issue that resulted in notifications not being configured initially. - Improved some enrollment steps on certain cameras. - Addresses an issue where sensor temperature would be invisible on certain panels. - Resolved a camera provisioning issue where certain text would get truncated if the user had Bold text accessibility option enabled. - Resolved some issues around SD Card reading/formatting in certain cameras. - Improved camera support. - Misc. bug fixes and improvements.

- Fixed a bug that caused the EULA acceptance screen to have buttons that matched the toolbar and were therefore impossible to see. - Resolved issues with two-way voice on certain doorbells. - Better handling of camera checking during enrollment against plan counts. - Resolved a bug for camera speaker settings on newer cameras. - Added initial scene name editing during creation. - Resolved an issue that prevented most z-wave devices from launching into their respective UIs from the device screen. - Resolved an issue that prevented certain camera provisioning attempts from succeeding. - Misc. bug fixes and improvements.

- Improved chime on open/close support. - Sending silence trouble beeps request now informs user that the request was sent. - Resolved issue where cancel/confirm feature setting wasn't captured in certain instances. - Improved chime managment support for partitioned systems. - Resolved a bug that prevented the global chime from showing the correct state. - Event log users should now match other platforms/clients. - Fixed a bug resulting in stalling when enrolling Onvif cameras. - Resolved a crash when removing an Onvif camera. - Resolved an issue where renaming a zone could see it flash back to the previous name due to a race condition with requesting the cached name immediately after. - Misc. bug fixes and improvements.

- Event log username alias lookup fix.

- Resolved a crash that could occur when trying to manage certain cameras. - Improved zone/user information population in event logs. - Certain cameras will no longer show the disabled record button if that feature isn't supported at all. - Legacy panels now show some version and system information in the settings. - Demo mode user management crash and bug fixes. - Improved handling of a Z-wave related "Not Responding" text to prevent it from flashing and showing when a value was nil. - Watch app stability improvements. - Minor watch app UI changes to better support smaller watch screens. - Improved handling of session tokens. - Added AI notification handling from certain cameras. - Fixed an issue causing z-wave device battery icons to show when they weren't necessary. - Fixed a bug that caused multiple camera images to temporarily show in a single camera's cell when loading. - Zone names should now show correctly in the event log when supported. - Added support for new camera types. - The watch app should no longer show duplicate device entries. - Demo mode will now show the dealer info section. - Cleaned up some commands that were incorrectly being sent to the wrong panel types. - Peripherals and zones should not disappear anymore. - Demo mode notification issues resolved. - Resolved some issues preventing peripherals from being correctly shown on certain panels when they should be. - Added panic notification support. - Added support for new panel types with partition support. - Misc. bug fixes and improvements.

- Improved peripheral trouble handling. - The silence troubles button should now always be shown on the trouble screen. - Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported. - Added support for "snoozing" a walkthrough after initial dismissal on certain panels. - Misc. bug fixes and improvements.

- Added support for unbypassing bypassed zones manually on newer panel types. - Fixed some issues around event logs in Demo Mode including their persistence once you log out. - Event logs should now be pulled for all panel types. - Resolved an issue in the system selection popup that prevented certain systems from showing their current armed state. - Resolved an issue that prevented door lock logs from populating. - Added theme change support to a view controller where it was missing (used by the Events screen/tab). - Added watch support. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Added a manual button for login via biometrics. - Improvements to scene management performance and process messaging. - Fixed broken arming levels in Demo Mode. - The app will no longer allow you to launch in landscape mode on iPhone devices, preventing odd UI bugs that require a restart of the app to fix. - Resolved arming bar icon flickering in the arming bar during entry/exit delay for certain panel types. - Misc. bug fixes and improvements.

- Resolved a crashing bug on certain devices.

- Resolved a bug that can prevent arming/disarming of certain devices.

- Resolved an issue where notification badging can break down when the app is in a background state. - Resolved sorting order of arming level items to prioritize Away/Stay. - Misc performance improvements and bug fixes.

- App notification badges are now only impacted by security event notifications. - Additional indicators and decorations have been added to clarify the event notifications and guide users where to go to clear them. - Update for arm modifiers (arm silent, no entry delay) for a specific panel type. - Fix for video camera clip access on some camera types. - Updated some user prompts to better reflect the condition of the account. - Misc updates and fixes.

- Chatty zones will now be indicated along with other zone issues. - Badge support added for security system events. - Critical notification support added. - Fixed live view crash. - Added support for silence trouble beeps on certain panels. - Z-Wave thermostat controls updated for all known system modes. - Added Spanish support. - Trouble conditions for the Touchpad should now show the correct touchpad hardware ID. - Resolved an issue where doorbell press notifications didn't contain a thumbnail. - Added support for BAT-Mini. - Added support for Heat sensors on certain panels. - Cleared type ahead after selecting a zone token on certain panels. - Added time sensitivity notification support. - Improved chat notifications to better to more accurately inform the user of the sender. - Resolved an issue that prevented the New User form from being scrollable at times. - Fixed a bug that causes issues with FaceID permissions. - Fixed a crash that could occur when using the Suggest button while changing your password. - The camera reboot option will now show for a certain camera firmware that wasn't previously supported but should have been. - Misc performance improvements and bug fixes.

- Resolved a bug that could result in the no-entry delay modifier being incorrectly shown. - Resolved an issue that prevented the New User form from being scrollable at times. - Fixed a bug that causes issues with FaceID permissions. - Fixed a crash that could occur when using the Suggest button while changing your password. - General stability improvements.

- Made modifications to camera enrollment flows to better support different models. - Resolved an issue that prevented the password strength meter from working when adding a user. - Updated some verbiage around certain camera motion detection area configurations. - Added missing localizations. - Resolved an issue where unenrolling a zone would temporarily remove all zones associated with that sensor regardless of zone input index. - Resolved user device permissions UI issues. - Resolved issues with the arm silent / arm audibly modifier. - Resolved issues that caused various lists to be incorrectly sorted. - Resolved camera related issues for certain models.

- Resolved some issues with the arm silent / arm audibly modifier. - Resolved issues that caused various lists to be incorrectly sorted. - Fixed an issue that prevented the app from ingesting some camera names at provisioning time.