A mistyped password no longer locks you out of your own camera. • When a camera or recorder refuses your login, setup now says the login was rejected instead of reporting that no cameras were found — and it stops early, so it no longer trips the lockout that makes these devices refuse even the correct password for several minutes • Enter your login once: the option to reuse a saved camera's login now appears on every setup screen, not just Add Camera, so a recorder full of cameras no longer means retyping it for each one • Fixed a case where one camera's password could carry over into the next camera's login and be rejected there • Cameras waiting on a Pro upgrade no longer show up as if they were never added, so they can't be set up twice Thanks for the detailed feedback — it directly shaped this update!

Deep Scan is now available wherever a scan comes up empty. • Deep Scan — the thorough sweep that finds NVRs and RTSP-only cameras — is now offered during first-time setup and whenever your camera list is empty, not just on the Add Camera screen • Cameras found that way can be set up on the spot: enter one login and every camera on the device is added together • Cameras with the sub-stream turned off are now detected properly — setup checks the main stream as well, so Lorex, Dahua and similar cameras no longer have to be added by typing an IP address • Larger, easier-to-tap buttons during first-time setup Thanks for the detailed feedback — it directly shaped this update!

Deep Scan is now available wherever a scan comes up empty. • Deep Scan — the thorough sweep that finds NVRs and RTSP-only cameras — is now offered during first-time setup and whenever your camera list is empty, not just on the Add Camera screen • Cameras found that way can be set up on the spot: enter one login and every camera on the device is added together • Cameras with the sub-stream turned off are now detected properly — setup checks the main stream as well, so Lorex, Dahua and similar cameras no longer have to be added by typing an IP address • Larger, easier-to-tap buttons during first-time setup Thanks for the detailed feedback — it directly shaped this update!

Smarter help when a scan comes up empty. • If devices on your network respond but none complete camera setup, the app now points you straight to Deep Scan — the thorough sweep that finds NVRs and RTSP-only cameras — instead of sending you to your router settings • The Deep Scan option is easier to spot after an empty scan • The keyboard's Go key now works as expected: it runs Test Connection when adding a camera manually, and Log In when connecting to a discovered camera Thanks for the detailed feedback — it directly shaped this update!

Smarter help when a scan comes up empty. • If devices on your network respond but none complete camera setup, the app now points you straight to Deep Scan — the thorough sweep that finds NVRs and RTSP-only cameras — instead of sending you to your router settings • The Deep Scan option is easier to spot after an empty scan • The keyboard's Go key now works as expected: it runs Test Connection when adding a camera manually, and Log In when connecting to a discovered camera Thanks for the detailed feedback — it directly shaped this update!

Camera discovery got a big upgrade. • Finds cameras it used to miss — including cameras that only answer over HTTPS, and cameras that ask for a login before they identify themselves • Gentler scanning, so your cameras stay online while you search instead of dropping off the network • New Deep Scan for stubborn cameras — a slower, more thorough sweep you can run on demand • Clearer scan results, and a camera that simply can't be reached no longer says your password is wrong Thanks for the great feedback!

Your camera thumbnails now refresh to a current frame every time you reopen the app, so the grid shows what's happening right now — on both NVR and direct connections. Plus stability improvements. Thanks for the great feedback!

• Choose your accent color in Settings: use the new blue look or keep the classic amber style. • Compatibility guidance now better explains local network cameras, including Wi‑Fi and wired setups. • Added Slovenian localization across the app and App Store listing. • Added a More Apps section in Settings

This update makes it easier to tell whether a camera will work before you spend time adding it. • Clearer guidance for cloud-only and battery cameras like Ring, Nest, Arlo, Wyze, Blink, Netvue, and Eufy. • Onboarding and the zero-camera empty state now point you to the compatibility guide sooner.

This update makes it easier to tell whether a camera will work before you spend time adding it. • Clearer guidance for cloud-only and battery cameras like Ring, Nest, Arlo, Wyze, Blink, Netvue, and Eufy. • Onboarding and the zero-camera empty state now point you to the compatibility guide sooner.

New in this version: • Add private, on-device notes to any camera. • Away from home, cameras now show "Waiting for Home Wi-Fi" with a clear explanation instead of an error. • Fixed: renaming a camera could switch NVR cameras to the wrong channel. • More reliable camera scanning. • Better login guidance for NVR cameras, including Dahua and Lorex.

New in this version: • Add private, on-device notes to any camera. • Away from home, cameras now show "Waiting for Home Wi-Fi" with a clear explanation instead of an error. • Fixed: renaming a camera could switch NVR cameras to the wrong channel. • More reliable camera scanning. • Better login guidance for NVR cameras, including Dahua and Lorex.

New in this version: • Add a camera by scanning its QR code — no more typing in IP addresses or RTSP links by hand. • Control night vision right from the live view: set the infrared (IR) filter to Auto, On, or Off. • Find more cameras automatically. An improved network scan picks up cameras the old search missed, including every channel on a Lorex, Dahua, or other NVR. • New "Can't find your camera?" guide walks you through Wi-Fi, ONVIF, and locating the camera's IP, step by step. • Manage your subscription and restore purchases right from Settings. • Refreshed design with a new connect animation and clearer connection status, plus paywall, trial-banner, and translation fixes.

New in 3.2: • Record live camera streams directly on your device. • View saved clips in the new Recordings tab, organized by camera. • Play back, share, or delete recordings anytime.

New in this version: • More reliable live camera streams when returning to the app or switching between views • Fixes for group and multi-camera views, including black screens and stuck stream states • Smarter reconnect behavior so cameras have more time to recover from connection issues • Localization fixes

New in this version: • Camera setup is clearer, with improved RTSP URL paste handling, better validation, and safer credential handling. • Live camera views are more reliable, including fixes for stream startup failures, HEVC playback stalls, and Picture in Picture video continuity. • Audio resumes more smoothly after phone calls and interruptions.

Added Help & Troubleshooting section.

Added Help & Troubleshooting section.

Improved translations.

- Camera stream will now attempt to reconnect when re-opening the app from the background. - Fixed crackling & popping audio issues.

- Camera stream will now attempt to reconnect when re-opening the app from the background. - Fixed crackling & popping audio issues.

- Camera stream will now attempt to reconnect when re-opening the app from the background. - Fixed crackling & popping audio issues.

Fixed zoom & pan bug.

Improved UI for faster camera discovery.

New icon.