ELEGOO Matrix App is an all-in-one smart app designed for ELEGOO 3D printers. It supports both Resin and FDM printers, helping you connect and manage printers, discover models, control print jobs remotely, monitor print progress, view print history, and respond to printing issues with ease.
With the app, you can easily connect and manage your printers, browse a wide range of free models in the Nexprint model library, discover creative content and practical print ideas, and start print jobs quickly. During printing, the app lets you check real-time progress, remaining time, and printer status. If a printer issue occurs or a print job is interrupted, the app will notify you promptly so you can identify and resolve issues faster.
Key Features:
1. Connect and control ELEGOO Resin and FDM 3D printers
2. Start, pause, and stop print jobs remotely
3. Monitor real-time print progress, remaining time, and printer status
4. Receive timely alerts for printer issues and print errors to help you quickly identify what went wrong
5. Explore the Nexprint model library to discover, save, and print your favorite 3D models
6. Automatically record print history for easy review, reuse, and troubleshooting
Supported Printers: Centauri 2, Centauri Carbon 2, Jupiter 2, Saturn 4 Ultra 16K, Saturn 4 Ultra, Mars 5 Ultra.
As others have mentioned, the app is limited with its functionality compared to other brands (can’t slice, can’t upload from phone, etc). Otherwise for basic functions like checking on prints or starting prints from files already loaded on the printer or on Nexprint, it’s good enough. Hopefully we get more functionality soon
Convenient
ᚲᚢᛚᛁᚾ
If you expect anything more from this app than basic print monitoring, you will be disappointed. That is not whst this app is for. This is a convenient way to access your Elegoo printer’s camera so you can keep tabs on your print without having to be tied to your computer.It also has other functions, like on-the-fly resin exposure changes so you can increase or decrease exposure (if for instance you habe a temperature probe in your printer or emclosure and see it’s fluctuated, you can adjust the exposure so you don’t over or under expose the prints because of those fluctuations) and it updates immediately. They’ve even recently added status ipdate notifications to let you know when your print calibration is done and when your print has completed (and I assume there would be notifications if it detected an issue; thankfully I haven’t had any print issues since this update.) My only gripe is that it’s kind of bad at its sole function. I don’t mean the camera angle or quality, I specifically mean connectivity. If I’m printing a long print, yknow, something that I would definitely need to be able to monitor reliably, the camera will disconnect about halfway through it (typically after 4 hours.) Why there’s no automatic refresh is beyond me, but, until this issue is fixed I can’t give it 5 stars. I’m hesitant to even give it 4, so I won’t. I have contacted them about this issue, so hopefully they’ll figure out how to fix it. Overall, great app. Just wish it was better at doing what it was built to do.
Upgrade works fine
ErgonomicZero
This app works fine to control basic features such as hot plate and nozzle temperature plus you can monitor it via the camera while away from the office or home. This would be a 5 star app if they made more of the print library available. I keep running into “coming soon” or must open by slicer program on pc. You also don’t have any dynamic control over the prints, such as making them bigger or multiples. Also, you have to dig through menus to find out your recent print history. This should be at the very top, but it only allows you to show prints that you’ve recently browsed and that can make it hard if you’ve spent some time on the library. On the whole this app has really taken off over the last few months as I think more people are discovering it. I really hope the developers add more control features and make more prints available.
Great idea, could definitely be better
GET YOUR GAMETOGETHER
The camera in the printer is a great idea for auto leveling and catching failed prints early. However, why is the camera unable to move? And honestly I can barely see the print anyway. I know it only starts recording once the print hits 100 mm (which is also weird imo). but it’s an incredible printer with so much potential, and I feel the same about this app. I’m giving it 3 stars with hope for a movable cam in the future which easily makes it 5.
1. Added support for Polish, Romanian, Czech, and Swedish interface languages.
2. Added support for device names in multiple languages.
3. Improved the user experience for some features.
4. Fixed known issues and improved app stability.
Version 1.2.7
The developer, 深圳市智能派科技有限公司, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Linked to You
The following data may be collected and linked to your identity:
Contact Info
User Content
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
User Content
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
