Motor FLA Calc NEC

NEC Art.430 Motor Calcs

$0.99 · In‑App Purchases · Designed for iPad. Not verified for macOS.

NEC motor FLA calculator for electricians. Tables 430.248/430.250, SCPD sizing, conductor and overload. NEC motor full-load amps calculator for electricians, apprentices, and electrical engineers. Look up motor FLA from NEC Tables 430.248 and 430.250, then get conductor sizing, overload protection, short-circuit protection device (SCPD), and disconnect ratings - all per NEC Article 430. Works 100% offline on the job site. Whether you are sizing a motor branch circuit for a 10 HP three-phase motor, selecting the correct breaker for a 5 HP single-phase motor, or verifying overload protection settings, this motor FLA calculator gives you accurate NEC-compliant results in seconds. MOTOR FLA CALCULATOR FEATURES: - Full-load amps lookup from NEC Table 430.248 (single-phase) and 430.250 (three-phase, induction and synchronous unity-PF sections) - Single-phase motors: 1/6 HP through 10 HP - Three-phase motors: 1/2 HP through 500 HP - 6 voltage presets: 115V, 200V, 208V, 230V, 460V, 575V - Conductor sizing per NEC 430.22 (125% of FLC) - Overload protection per NEC 430.32 (service factor adjustment) - SCPD sizing per NEC Table 430.52 with 4 motor types and 3 device types - Disconnect rating per NEC 430.110 - Copper and aluminum conductor support - Wire size recommendation from NEC Table 310.16 (75C column) - Standard breaker and fuse size selection per NEC 240.6, including fuse-only ratings 1, 3, 6, 10, 601 NEC ARTICLE 430 REFERENCES: - NEC Table 430.248 - Single-phase motor full-load current - NEC Table 430.250 - Three-phase motor full-load current - NEC Table 430.52 - SCPD maximum rating percentages - NEC 430.22 - Motor branch circuit conductor sizing - NEC 430.32 - Overload protection sizing - NEC 430.110 - Disconnect rating requirements - NEC Table 310.16 - Conductor ampacity for wire sizing SCPD SIZING (NEC TABLE 430.52): - Non-time-delay fuse sizing - Dual element (time-delay) fuse sizing - Inverse time circuit breaker sizing - 4 motor design types: squirrel cage, Design B energy-efficient, wound rotor, synchronous PRO FEATURES (one-time purchase): - No ads - clean interface for professionals - Save motor calculation history - Export calculations as PDF reports for permits and records - Dark theme support HOW THE MOTOR FLA CALCULATOR WORKS: 1. Select motor type (single-phase or three-phase) 2. Choose horsepower rating 3. Select voltage 4. Set motor design type and SCPD type 5. Choose conductor material (copper or aluminum) 6. Toggle service factor setting 7. Get complete motor branch circuit sizing instantly The motor FLA calculator automatically provides: - Full-load amps from official NEC tables - Minimum conductor size with ampacity reference - Maximum overload protection rating - SCPD (breaker/fuse) size rounded to standard sizes - Minimum disconnect ampere rating BUILT FOR ELECTRICIANS ON THE JOB SITE: This motor FLA calculator is designed by electricians, for electricians. Select your motor parameters, get the complete branch circuit sizing instantly - no complicated menus or unnecessary features. One-hand operation, instant results. PERFECT FOR: - Licensed electricians sizing motor circuits daily - Electrical apprentices studying for journeyman exams - Electrical engineers and designers - Electrical contractors bidding jobs - NEC code exam preparation - Journeyman and master electrician exam study OFFLINE AND PRIVACY: - Works 100% offline - no internet needed on the job site - No account required - No data collection - your motor calculations stay on your device

Ratings & Reviews

  • This app hasn’t received enough ratings or reviews to display an overview.

What's new: • Synchronous motor FLA from the dedicated unity-PF section of NEC Table 430.250 (25–200 HP) • Removed non-code 230V values above 200 HP — voltage list now matches the printed table exactly • Fuse sizing uses the additional NEC 240.6(A) ratings 1, 3, 6, 10, 601 for small motors • All FLA cells verified one-by-one against the printed NEC tables Thanks for using ElecTools! Send feedback to support@tradetools.dev.

Version 1.0.8

The developer, Rizvan Adzhoian, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Used to Track You

    The following data may be used to track you across apps and websites owned by other companies:

    • Identifiers

  • Data Not Linked to You

    The following data may be collected but it is not linked to your identity:

    • Identifiers
    • Usage Data
    • Diagnostics

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Accessibility

The developer has not yet indicated which accessibility features this app supports. Learn More

Information

Seller
  • Rizvan Adzhoian
Size
  • 35.7 MB
Category
  • Utilities
Compatibility
Requires iOS 13.0 or later.
  • iPhone
    Requires iOS 13.0 or later.
  • iPad
    Requires iPadOS 13.0 or later.
  • iPod touch
    Requires iOS 13.0 or later.
  • Mac
    Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
  • Apple Vision
    Requires visionOS 1.0 or later.
Languages
  • English
Age Rating
18+
In-App Purchases
Yes
Copyright
  • © 2026 Rizvan Adzhoian
  • Developer Website
  • Privacy Policy

    • More by Rizvan Adzhoian