The packaging and product literature highlight that you can use Siri Shortcuts to control the light. There are no included instructions to help with this, but there are instructions for setting up Alexa and Google control. Also, using Shortcuts app to set up light control, the Shortcuts app is unable to locate and communicate with the Energizer app. This means they did not enable any form of integration with IOS and/or the Shortcuts app for iPhones. A bit of false advertising. Otherwise the light itself works fine if controlled directly from the Energizer Connect app.

Here are the good things the night vision mode the IR mode in the lights mode all seem to work very well for movement and when you get closer, the light turns on and it catches the person in color at night. The camera seems to be pretty good, but you do have to mess around with the sensitivity sound/motion if you’re in a more populated area this may trigger more often. Just an FYI otherwise it works OK. The bad things doesn’t do as much as you would think it would do it would be nice if it had a pan mode where it would slowly go back-and-forth from a set point to a set point and kind of keep an eye on a larger area and then if it detects move it would hold and focus on that movement. It doesn’t do this. Which is too bad the only other bad thing. Is set up has to be done during normal business hours of the week in other words if you’re trying to program it Saturday or Sunday it does Program and initial set up. The ugly side it appears to get worse, but appears to be glitchy. The camera view tends to go in and out. Or blank screen, and then back again sometimes flickering on and off not sure why. And it seems to have gotten worse when I added the extra cameras. Not sure why either. All in all it does the job records, the information and if you want, you can store it either by mini card or subscription. And have very little problems with it, except for the weird glitch where it flickers on and off at times.

I almost gave up using this several months ago when we upgraded our wifi to a gen 6 mesh system. My older (2 years old if I recall) smart plugs, and this app, apparently only work with a 2.4GHz network. (That’s wifi gen 1, I believe, if you’re curious, though gen 4 devices are usually backwards compatible.) Anyway, just a few weeks ago I had an opportunity to get an extender that happens to create a 2.4GHz network, so these devices started working again. Great!Still, the app struggled to get the devices configured. There’s 3 different ways to attempt to configure devices, and I had to try all 3 before the last method worked. I also struggled with the app to figure out what it wanted me to do. For some reason the interface has buttons that look like they’re grayed out that I didn’t even realize were buttons at first, but I had to tap them to continue. Anyway, I finally figured it out, though, and now I can use my plugs again.They also can be linked up with my Google Home, which is nice, so I can use the plugs in automations over in that system as well.

You have to be afraid of contacting energizer company, they get snobby and snooty, sometimes they not reply back with info, sometimes they get opinionated and remark sarcastically, you have to be afraid if they cut you off with programming of doorbell cam so it not work for you, they do not inform what existing doorbell systems this works with, you cannot print out any manuals so when on internet you are wasting time bouncing around to find an answer to your problems, even doorbell electricians have problems where they isolate unit by itself and now you have two doorbell systems, I have been dealing with Energizer company for three years on issues with this doorbell cam and if you have need to contact someone well good luck with that… you are dealing with a firmware company, a device company, And the Energizer sale dept, you can’t download manuals for troubleshooting, specs, or guides on programming, goin thru thar internet menus wastes your time and confuses you in finding the answers you seek….stick with Energizer Batteries as this is something they do well with!!