Supports SkyPanel X, L-Series Plus and LiOS 3.1.

Supports latest Orbiter accessories - Fresnel 15-65° and Projection Optics 25° and 35°. Allows for automated control of Zoom (Fresnel) and Focus (Projection Optics)

Support LiOS 2.0

Stellar 2.5 Release Notes Now all features are free to use up to five fixtures Unlimited access with one-time payment Improved user experience New and improved demo scene Bug fixes and stability improvements V: 2.5.5 Bugfixes

Stellar 2.5 Release Notes Now all features are free to use up to five fixtures Unlimited access with one-time payment Improved user experience New and improved demo scene Bug fixes and stability improvements Fix: 2.5.1 Added looks to demo Rename Demo Project

Stellar 2.5 Release Notes Now all features are free to use up to five fixtures Unlimited access with one-time payment Improved user experience New and improved demo scene Bug fixes and stability improvements Fix: 2.5.1 Read looks to demo Rename Demo Project

Stellar 2.5 Release Notes Now all features are free to use up to five fixtures Unlimited access with one-time payment Improved user experience New and improved demo scene Bug fixes and stability improvements Fix: 2.5.1 Readd looks to demo Rename Demo Project

2.4.2 - Fix disconnected state of manually added fixtures - When 8-bit mode is set on the fixture use the same mode on the app - Fix no output when switching between color field and sliders in RGBW mode 2.4 - Virtual Grouping Users can now make groups across types of fixtures so that they can be controlled together as a lighting position, and can now set levels and colors and control all of the lights together. A small message will alert the user that they have combined mis-matched sets of LED engines if they have done so with their group. This states that that some color controls are not available for older fixtures, but common colors across fixtures can be adjusted together. - Solo, Previous, Next The new “Solo” feature greatly improves the speed of setting light levels by adding the ability to adjust individual lights within a group quickly. The new "Previous” and “Next” buttons have been added which allow the user to advance thru the fixtures, by dimming the first light and illuminating and shifting control to the next luminaire. Tapping “Solo” again at the end of the adjustment period will restore the intensity and control of the group, allowing the user to save varying parameters within a group to a new “Look”. - Improved fixture discovery and app performance

- Virtual Grouping Users can now make groups across types of fixtures so that they can be controlled together as a lighting position, and can now set levels and colors and control all of the lights together. A small message will alert the user that they have combined mis-matched sets of LED engines if they have done so with their group. This states that that some color controls are not available for older fixtures, but common colors across fixtures can be adjusted together. - Solo, Previous, Next The new “Solo” feature greatly improves the speed of setting light levels by adding the ability to adjust individual lights within a group quickly. The new "Previous” and “Next” buttons have been added which allow the user to advance thru the fixtures, by dimming the first light and illuminating and shifting control to the next luminaire. Tapping “Solo” again at the end of the adjustment period will restore the intensity and control of the group, allowing the user to save varying parameters within a group to a new “Look”. - Improved fixture discovery and app performance

2.3.9 • Fixed a bug that discovery does not work with iOS 14.5 2.3.7 • Fixed a bug that caused Stellar to stop working when connected directly to a Skypanel via LAN • Fixed a bug where Luminode 4 was not correctly detected • Support: Source Four LED Series 2 Lustr 2.3 • Includes ARRI’s new LED fixture Orbiter • Multi-Select fixtures • Add Art-Net nodes manually • Look preview on Look items • Bi-Color mode for certain fixtures • Improved discovery performance • Varies updates for 3rd party fixtures • Other usability-, layout-, and stability-improvements

2.3.7 • Fixed a bug that caused Stellar to stop working when connected directly to a Skypanel via LAN • Fixed a bug where Luminode 4 was not correctly detected • Support: Source Four LED Series 2 Lustr 2.3 • Includes ARRI’s new LED fixture Orbiter • Multi-Select fixtures • Add Art-Net nodes manually • Look preview on Look items • Bi-Color mode for certain fixtures • Improved discovery performance • Varies updates for 3rd party fixtures • Other usability-, layout-, and stability-improvements

• Includes ARRI’s new LED fixture Orbiter • Multi-Select fixtures • Add Art-Net nodes manually • Look preview on Look items • Bi-Color mode for certain fixtures • Improved discovery performance • Varies updates for 3rd party fixtures • Other usability-, layout-, and stability-improvements

• Includes ARRI’s new LED fixture Orbiter • Orbiter RDM gateway beta version • Multi-Select fixtures • Add Art-Net nodes manually • Look preview on Look items • Bi-Color mode for certain fixtures • Improved discovery performance • Varies updates for 3rd party fixtures • Other usability-, layout-, and stability-improvements

• Includes ARRI’s new LED fixture Orbiter • Orbiter RDM gateway beta version • Multi-Select fixtures • Add Art-Net nodes manually • Look preview on Look items • Bi-Color mode for certain fixtures • Improved discovery performance • Varies updates for 3rd party fixtures • Other usability-, layout-, and stability-improvements

- Control third party fixtures: KinoFlo, Astera, LiteGear, Generic and more will follow - Manually add fixtures (no RDM required) - Grouping of fixtures with different CCT ranges - Presets now work cross-model - Empty slot suggestion when setting a DMX start addresses - Swap out (defective) fixtures (with the same model type) - Preserve intensity when switching color modes - Configurable default intensity - Sensor values are shown in the fixture status (temperature, voltage, wattage, …) - Apply look is smoother when no color mode change is necessary - Trial phase expiry warning - Improved connectivity handling - Other usability-, layout-, and stability-improvements

- Control third party fixtures: KinoFlo, Astera, LiteGear, Generic and more will follow - Manually add fixtures (no RDM required) - Grouping of fixtures with different CCT ranges - Presets now work cross-model - Empty slot suggestion when setting a DMX start addresses - Swap out (defective) fixtures (with the same model type) - Preserve intensity when switching color modes - Configurable default intensity - Sensor values are shown in the fixture status (temperature, voltage, wattage, …) - Apply look is smoother when no color mode change is necessary - Trial phase expiry warning - Improved connectivity handling - Other usability-, layout-, and stability-improvements

- Control third party fixtures: KinoFlo, Astera, LiteGear, Generic and more will follow - Manually add fixtures (no RDM required) - Grouping of fixtures with different CCT ranges - Presets now work cross-model - Empty slot suggestion when setting a DMX start addresses - Swap out (defective) fixtures (with the same model type) - Preserve intensity when switching color modes - Configurable default intensity - Sensor values are shown in the fixture status (temperature, voltage, wattage, …) - Apply look is smoother when no color mode change is necessary - Trial phase expiry warning - Improved connectivity handling - Other usability-, layout-, and stability-improvements

- Control third party fixtures: KinoFlo, Astera, LiteGear, Generic and more will follow - Manually add fixtures (no RDM required) - Grouping of fixtures with different CCT ranges - Presets now work cross-model - Empty slot suggestion when setting a DMX start addresses - Swap out (defective) fixtures (with the same model type) - Preserve intensity when switching color modes - Configurable default intensity - Sensor values are shown in the fixture status (temperature, voltage, wattage, …) - Apply look is smoother when no color mode change is necessary - Trial phase expiry warning - Improved connectivity handling - Other usability-, layout-, and stability-improvements

- Control third party fixtures: KinoFlo, Astera, LiteGear, Generic and more will follow - Manually add fixtures (no RDM required) - Grouping of fixtures with different CCT ranges - Presets now work cross-model - Empty slot suggestion when setting a DMX start addresses - Swap out (defective) fixtures (with the same model type) - Preserve intensity when switching color modes - Configurable default intensity - Sensor values are shown in the fixture status (temperature, voltage, wattage, …) - Apply look is smoother when no color mode change is necessary - Trial phase expiry warning - Improved connectivity handling - Other usability-, layout-, and stability-improvements

New features in Stellar 1.7: •Renamed „Scene“ to „Set“ •Option to turn off fixtures when exiting a set •Improved handling of different tablet or mobile phone device types •Improved handling of synced Light Plots •Improved RDM handling of fixtures •Disconnected fixture visibility •Faster exchange of Sets in Live Sync •UI improvements for devices with small screens •improved lighting effect UI •Improved discovery process to handle multiple ArtNet Nodes •Optional app setting: Preventing device sleep •Workflow of Color Mode selection sped up •Increased touch sensitive areas for sliders •Improved handling and selection of Light Plots •Black out indicator for fixtures •Delete all Favorites •New default intensity for fixtures: 20% •New default value for x,y-Mode: 0.3333/0.3333 •New default value for all CCT-related controls: 5,600 K •New default position for RGBW : Center New in 1.7.1: •small bug fixes We’re also happy if you would provide feedback on Stellar as we continue to add and improve it in future releases.

New features in Stellar 1.7: •Renamed „Scene“ to „Set“ •Option to turn off fixtures when exiting a set •Improved handling of different tablet or mobile phone device types •Improved handling of synced Light Plots •Improved RDM handling of fixtures •Disconnected fixture visibility •Faster exchange of Sets in Live Sync •UI improvements for devices with small screens •improved lighting effect UI •Improved discovery process to handle multiple ArtNet Nodes •Optional app setting: Preventing device sleep •Workflow of Color Mode selection sped up •Increased touch sensitive areas for sliders •Improved handling and selection of Light Plots •Black out indicator for fixtures •Delete all Favorites •New default intensity for fixtures: 20% •New default value for x,y-Mode: 0.3333/0.3333 •New default value for all CCT-related controls: 5,600 K •New default position for RGBW : Center We’re also happy if you would provide feedback on Stellar as we continue to add and improve it in future releases.

Minor adjustments to support changes coming with iOS 13 and iPadOS. • alignment with general UI alterations • Stellar comes with a dark theme since day one - we are opting out of Dark Mode, for now • minor data compatibility modifications

What’s new in Stellar 1.5? Live Sync Live Sync in Stellar is an exciting new feature that enables real time interaction between Stellar on separate devices. Allowing multiple users to work on the same project and scene simultaneously, Live Sync now gives the ability to truly work collaboratively on the same file. Please give feedback on this feature as we continue to add and improve it in future releases. Export/Import Stellar now gives the ability to export and import projects, scenes, and favorites. Use the three dots menu to export to the cloud, share wirelessly between devices, email or message, and many more ways to share your work. iCloud Backup Stellar will now back up all your projects, scenes, and favorites to iCloud. This sync happens automatically and instantly, allowing you to have the same files across multiple devices using the same iCloud account. Other Improvements Stellar contains additional improvements including: ability to delete all favorites, improved lighting effect UI, black out indicator for fixtures, improved RDM identify behavior, disconnected fixture visibility, bug fixes, and much more.

Welcome to Stellar 1.1! This version brings many stability and performance improvements. The following enhancements have also been made: - Improved search function for gels and sources - Improved fixture status and information pages - iPhone layout and text input improvements - Lighting Effects settings for favorites fix - Looks now save blackout state of fixtures - Default intensity is 100% - Light Plot behavior improvements - Many more small fixes and improvements

Minor Optimizations