- Improve camera handling of push notifications on cold starts on certain cameras. - Resolved identification and handling issues on certain panels. - Fixed some bugs with the messenger and notifications. - Fixed a "Disarming..." indicator that could remain on screen after the system had disarmed. - Improved camera/doorbell support on certain devices. - The watch app now supports zone statuses. - Fixed an incorrect orange settings indicator on certain cameras until the SD Card screen had been opened. - Fixed a sensor zone occasionally listing the same state twice (e.g., "Tampered | Tampered"). - Activating or deactivating a scene on a multi-partition panel no longer resets the scene to partition 1. - Scanning certain non-validated cameras now shows a clearer prompt with options instead of failing partway through pairing. - Added motion tracking support for compatible cameras where the feature was missing. - Fixed several issues on multi-partition systems, including incorrect arming options and zones disappearing when switching partitions. - Improved sync of arming state and user permissions when returning to the app. - Reduced flicker and faster app launch on accounts with multiple systems. - Fixed a spurious "Failed to grant access" message when adding a user. - Fixed a rare crash when handling push notifications. - Disabled partitions are no longer shown on device, zone, and scene cards. - Improved the camera Event Reporting toggle with a loading indicator while changes apply. - Misc. bug fixes and improvements.

- Improved NFC support where applicable. - Added partition and cancel/confirm support in the watch app. - Improved sensor support for Open/Close scene triggers. - Added momentary open hardening. - Improved System Arming Level triggers to better support different panel types. - Improved live view aspect ratio support. - Various UI and prompt tweaks. - Added camera battery indicator where supported. - Fixed username sync issues. - Fixed some camera timezone issues. - Resolved issues between user sessions. - Fixed Zone notification device name not showing in notification title. - Resolved localization and notification issues. - General crash hardening. - Misc. bug fixes and improvements.

- Fixed some localization issues. - Fixed some camera aspect ratio issues. - Resolves some motion detection setting issues. - Adds some motion detection event context info where applicable. - Misc. bug fixes and improvements.

- Zone bypass prompt should now show where applicable during arming sequences. - Misc. bug fixes and improvements.

- Made modifications to camera enrollment flows to better support different models. - Resolved an issue that prevented the password strength meter from working when adding a user. - Updated some verbiage around certain camera motion detection area configurations. - Added missing localizations. - Resolved an issue where unenrolling a zone would temporarily remove all zones associated with that sensor regardless of zone input index. - Resolved user device permissions UI issues. - Resolved issues with the arm silent / arm audibly modifier. - Resolved issues that caused various lists to be incorrectly sorted. - Resolved camera related issues for certain models.

- Resolved some issues with the arm silent / arm audibly modifier. - Resolved issues that caused various lists to be incorrectly sorted. - Fixed an issue that prevented the app from ingesting some camera names at provisioning time.

- Fixed demo mode which was only showing cameras. - "Demo" mode button is now disabled when there is text in the password field - Network call improvements.

- Removed un-utilzied contact info fields. - Peripheral display support added. - Peripheral management support added (when allowed). - Resolved an issue that could cause camera info to not be properly populated. - Resolved an issue that resulted in notification tokens not being registered on the first launch correctly. - Improved user management, especially "by system". - The user will now be prompted to double check changes after attempting a WiFi network reconfiguration on a camera to verify desired settings. - Post WiFi reconfiguration on a camera, the application will kick off an automatic configuration migration attempt to sync the camera with previously known settings.

- Resolved an issue where the OK button on the Wi-Fi Credentials modal during camera enrollment could become disabled w/out recourse. - Added support for alula siren enrollment. - Local Access Users now have their own section in the user management list. - Resolved an issue where BAT-Connect could create a disarm action with the silent modifier, which isn't supported. - Added user promotion support. - Resolved an issue where newly created Sub-Users w/out access to any cameras or devices would see the camera tab. - Resolved a french localization issue that caused a good chunk of the application from being translated appropriately in French. This also created some weird UI layout issues. - Resolved an issue that resulted in failed branding logo retrievals. - Resolved an issue that prevented certain zone configuration features from being set. - Resolved an issue where you couldn't rename a system from the "Done" button above the keyboard in Settings. - Resolved an issue where you couldn't toggle the camera microphone setting on certain cameras. - Resolved an issue where the app could crash during camera enrollment when going down the manual enrollment flow. - Resolved a crash. - Added support for new cameras.

- Resolved an issue that could prevent certain cameras from provisioning over ethernet.

- Resolved an issue where the app would incorrectly show Privacy Mode for a camera. - Minor verbiage changes.

- Resolved an issue where cameras could show offline even when they were online.

- Resolved an issue where deleting a user wouldn't update locally until the app was restarted. - Resolved an issue for a certain camera that allowed it to attempt a wired provisioning flow when it wasn't supported by the firmware of the camera. - Improved wired provisioning flow on certain camera models. - Added some additional dialogs around saving camera screenshots and videos to the photo album if permissions prevented it. - Fixed an issue where the "Add Camera" button or camera device messages in the cameras list could appear incorrectly in demo mode as well as between user sessions. - Resolved some post-log-in issues that resulted in premature dialogs regarding devices or incorrectly configured tabs. - Resolved some account management issues. - Resolved an issue where users under the same primary account, with access to the same cameras, couldn't see clips after logging in without first backgrounding the application. - Resolved camera related performance issue that can reduce CPU usage by roughly 40%. - Demo mode now disables unsupported camera features, including the ability to add cameras. - After logging out of demo mode, the theme is now reset to the default. - Switching accounts should now clear the debug log. - Demo mode camera missing firmware version and problem conditions have been resolved. - Resolved an issue where first-time users would prematurely see a message regarding a lack of devices. - Resolved an issue where the live view wasn't showing data rate info for certain cameras. - Resolved a crash that could occur when saving camera snapshots. - Disabled editing on debug view. - Improved performance with certain cameras. - Added additional logging for cameras. - Misc fixes and improvements.

- Resolved an issue that prevented suppressed events from showing in the event log.

- Fixed a bug that caused issues with the navigation bar on rotation in the camera region editor. - Camera card gear icon problem conditions updated. - Added offline overlay changes to the camera card. - Added some additional camera debugging output. - Fixed an issue on certain cameras during WiFi config that resulted in premature provisioning attempts. - Improved handling of poor camera connections. - Resolved an issue where some camera previews would return with an incomplete image. - The login screen will now disable the login button when appropriate. - Improved logic around changing passwords. Biometric auth pre-password change now removes the need for redundant password entry. - Misc bug fixes and improvements.

- Fixed demo mode. - Added messaging around authentication failures. - Resolved some messaging notification issues. - Misc bug fixes and improvements.

- Added supported camera checking and notices along with a link to the camera support url. - Added a logout button and some user-type-specific text to the screen if you log in to an account without any devices. - Moved the chat/messenger icon to the tab bar. - Added support for tab bar sorting. - Modified the navigation behavior of the "More" tab. - Added a password suggestion button and password visibility toggles to the create user screen via the "Manage Access" flow. - Added support for the Ecolink PIR. - Resolved an issue where clicking on cameras on certain user management screens would navigate to a blank permissions screen. - Resolved an issue that was causing navigation controllers to unnecessarily pop back to their root view controllers. - Reworked panel picker UI. - Added dashboard item sorting. - Pull to refresh indicator added to cameras and scenes. - Added a feature to show processing video events for cameras where it is supported. - Improved some video event network calls, notification handling and event processing. - Added visibility toggle to user pin codes. - Added video event pull to refresh support. - Misc bug fixes and improvements.

- Improved display performance/consistency/reliability for Cancel/Confirm. - Fixed a bug where switching between dates on the camera cells wouldn't transition the slider thumbnail icon. - The video cell slider should now default to showing the most recent clips first when looking at "Today". - Fixed a bug where account holders couldn't delete other account/admin level users. - Updated some camera provisioning screens. - Removed the floating chat icon from non-primary screens. - Added support for new tilt sensor. - Added motion detection region support.

- Fixed a bug that caused the app to crash sometimes. - Reworked some camera motion detection configuration menus.

- If camera provisioning fails due to what appears to be incorrect credentials, the stored password is cleared and the user must re-enter the password. - Improved camera firmware update messaging to decrease confusion with new cameras. - Added PTZ home + calibrate support for certain cameras. - Restored previously broken notification live view action options for video notifications. - Resolved an issue where validate on resume/disarm would show as enabled for new accounts. - Resolved an animation issue with the QR code scanner. - Improved BLE connection failure handling for provisioning of certain cameras.

- Improved the manual input flow for camera registration and added support for new cameras. - Added an in-app notification settings link in the app's notification system settings. - Improved new camera online/offline status handling. - Improved Concord 4 support. - User permissions are no longer allowed to be modifiable while a system is armed. - The video event player should now allow you to go back to the last event at the end of the list instead of the previous to the last event. - Resolved an issue where a user would be incorrectly informed that they don't have permission to perform an alarm arming action in certain scenarios when they actually do.

- Fixed a color issue that was making it impossible (or close to it) to read thermostat temperature.

- Fixed a bug that prevented BAT-Fire from seeing the event log. - Fixed a bug that prevented certain legacy security panels from displaying in the app. - Fixed a bug that resulted in an error message when provisioning a new camera model. - Fixed a bug that caused a crash during device naming procedures.

- Fixed some crashing bugs. - Added a firmware check following provisioning of cameras. Provided there is an available firmware update, the app will kick off the update and prompt the user. - Added support for new camera models.

- Fixed some crashing bugs.