Torque Pro: OBD2 Car Scanner – Professional Vehicle Diagnostics & Performance Tools
Turn your iPhone into the ultimate automotive diagnostic companion. Whether you're a professional mechanic, passionate enthusiast, or everyday driver, Torque Pro delivers comprehensive vehicle insights with an intuitive, powerful interface designed for both beginners and experts.
AI-POWERED DIAGNOSTICS & ENHANCED FEATURES
• NEW: Full vehicle history report: Get a clear picture of your car's past, including accident history, mileage discrepancies, title issues, and more.
• NEW: AI Mechanic provides plain-language trouble code explanations and repair recommendations
• NEW: Enhanced performance testing with real-time dyno graphs and improved accuracy
• NEW: Multiple premium dashboard themes with customizable gauge layouts
COMPREHENSIVE DIAGNOSTICS
• Read and clear trouble codes (DTCs) to immediately identify issues
• Reset check engine light after addressing problems
• Monitor emission readiness status and inspection preparation
• View live sensor data with real-time updates and logging
• Save diagnostic sessions for historical comparison and tracking
PREMIUM DASHBOARD EXPERIENCES
• Choose from multiple professionally designed layouts:
Modern: Clean, information-rich interface with key metrics
Classic: Traditional gauge-style presentation for familiar readings
Performance: Focus on power, torque, and driving metrics
Minimal: Distraction-free design showing only essential information
ADVANCED PERFORMANCE TESTING
• Real-time dynamometer mode calculates horsepower and torque curves
• 0-60 mph acceleration testing with precision timing
• Quarter-mile estimations and performance analytics
• Track mode for recording lap times and performance metrics
• Export performance data for detailed analysis
COMPLETE SENSOR SUPPORT & CUSTOMIZATION
• Monitor standard OBD2 sensors including RPM, speed, temperature, and more
• Access advanced sensors: fuel rate, mass air flow, intake temperature, and fuel trim
• Create and monitor custom PIDs for aftermarket sensors or specific vehicle functions
• Configure warning thresholds with visual and audio alerts
• Real-time graphing of multiple parameters simultaneously
VEHICLE MANAGEMENT
• Multi-vehicle garage with automatic VIN detection
• Vehicle-specific profiles and settings
COMPATIBILITY & CONNECTIVITY
• Works with all OBD2-compliant vehicles (1996+ for US, 2001+ for EU)
• Compatible with gasoline, diesel, hybrid, and many electric vehicles with OBD2 ports
• Connects via Bluetooth to standard ELM327 and similar OBD2 adapters
• Optimized for Wi-Fi adapters for faster data rates
• Support for CAN, ISO, SAE and other manufacturer-specific protocols
Subscription Options: • Weekly, Monthly, Yearly Premium.
Subscription Details: • Payment will be charged to your Apple ID account at confirmation of purchase • Subscriptions automatically renew unless auto-renewal is turned off at least 24 hours before the end of the current period • Your account will be charged for renewal within 24 hours prior to the end of the current period • Subscriptions may be managed by the user and auto-renewal may be turned off by going to the user's Account Settings after purchase • No cancellation of the current subscription is allowed during the active subscription period • Any unused portion of a free trial period, if offered, will be forfeited when the user purchases a subscription
Privacy Policy: https://www.sadynamics.com/torque-pro-privacy-policy/
Terms of Use: https://www.sadynamics.com/terms-of-use-torque-pro/
*Note: Requires compatible OBD2 Bluetooth or Wi-Fi adapter (not included) connected to your vehicle's OBD port. Feature availability may vary depending on your vehicle's make, model, and OBD implementation. For optimal performance and fastest refresh rates, we recommend using Wi-Fi adapters.
Support: torque.pro@sadynamics.com
Own a 2019 Jeep Grand Cherokee and the ODBLink MX+ and purchased the 12 month annual subscription and done all the troubleshooting you can think of unhook the Bluetooth from the phone and reset it on the phone uninstall the app reinstall the app. An no matter what connection type I pick it doesn’t. Don’t know what else to do besides request a refund and try another company.
Developer Response
Hello, we’re aware of the connectivity issues with the OBDLink MX+, and our development team is actively working to resolve them. This issue will be fixed in the upcoming update (3.3.39). Thank you for your patience, and please stay tuned for the next release.
Completely useless
Parkinglotmechanic
I purchased a 1 week subscription for this app to gain full access in order to check fuel pressure and battery health on a vehicle I was buying. The Dongle that I have is WiFi and the app gives the option for WiFi connectivity.I use an iOS device that has been updated and current.I could not get the app to maintain a stable connection. It did not allow me to set WiFi as a default method of connection, in fact, the app would shut down immediately as it was looking like it would connect to the ECU.The app was completely useless to me.
Developer Response
Hello!To use the app properly with Wi-Fi, please follow these steps:1.Connect to your OBD adapter:Go to your phone’s Settings → Wi-Fi, and connect to your OBD adapter.2.Check IP address and port:Make sure your OBD adapter’s IP address and port number match the app’s default settings.(Default: IP address – 192.168.0.10, Port – 35000, unless otherwise specified by your adapter.)3.Set up the Torque app:Open the Torque app → go to Settings → set Connection Type to Wi-Fi.4.Start the app:Press Start to begin using the app.You should now be able to use the app smoothly. You can also check your vehicle’s battery health without needing a subscription.We’re committed to giving you the best experience. If you continue to have issues after following this guide, please contact us with more details at: torque@sadynamics.comThank you!
Super slow and very limited data
barobust
I bought the one year subscription so I could have the ability to have a portable system for diagnosing cars. The app is very slow to read data so you can't see anything in real time. On top of that, there isn't a very good amount of data points to be read. I was really hoping to be able to use it instead of my scan tool all the time. It was a total waste of money.
Developer Response
We’re sorry to hear about your experience. Several factors could be contributing to the performance issues you described, especially the OBD adapter being used. Lower-cost or lower-quality adapters can significantly affect refresh speed, available data points, and overall real-time performance. For the best results, we recommend using a high-quality adapter such as the OBDLink MX+, which should provide a much more reliable experience.If you do not believe the issue is related to your OBD adapter, please send us more detailed information, including the vehicle make and model, as well as the adapter you are using, and we’ll be happy to look into it further and solve the problems. Support: torque.pro@sadynamics.com
Don't bother
MachZ
Constant crashes, struggles with WiFi, and worst of all it's on a subscription model. Everyone is beyond tired of subscriptions, especially for an app that a normal person would maybe use once every few years.Unless you're trying to cater to the professional mechanic market, good luck with that, a subscription based app is insane.
Developer Response
Thanks for the candid feedback we understand the frustration, especially around reliability and subscriptions.On the subscription; the reality is that ongoing development and support has real, recurring costs. The subscription is what funds the engineering team that maintains the app, fixes bugs, improves Wi-Fi performance, and ships updates. Without recurring revenue, we can’t sustainably operate the development and support work required to keep the product reliable.On the crash issue specifically, we’ve been actively working on stability and the upcoming update includes fixes that resolve the crashes you reported.We appreciate you taking the time to share this and I’ve also passed your comments about “occasional use” customers to the team as we continue evaluating how we package and price the product.
# Improved overall performance for a faster, smoother Torque experience.
# Added more language translations to make the app easier to use worldwide.
# Enhanced app stability and reliability across core features.
# Continued refinements to deliver a more polished user experience.
Version 3.3.42
The developer, Collabrains Technologies LTD, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Used to Track You
The following data may be used to track you across apps and websites owned by other companies:
Usage Data
Data Linked to You
The following data may be collected and linked to your identity:
Usage Data
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
Identifiers
Diagnostics
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
Seller
Collabrains Technologies LTD
Size
96.8 MB
Category
Utilities
Compatibility
Requires iOS 18 or later.
iPhone Requires iOS 18 or later.
iPad Requires iPadOS 18 or later.
Mac Requires macOS 15.0 or later and a Mac with Apple M1 chip or later.
Apple Vision Requires visionOS 2.0 or later.
Location
This app may use your location even when it isn’t open, which can decrease device battery life.
