Pedal Builder Toolkit

Design, drill and wire pedals

$9.99 · Designed for iPad. Not verified for macOS.

From first schematic to finished stompbox: circuit design wizards, off-board wiring, drilling templates, parts lists and a build log. Pay once. Pedal Builder Toolkit is for people who build their own guitar effects pedals. Every build sits on your bench as a coloured enclosure with its drilled layout, how many of its parts you have, and what comes next. The tools live in drawers beside it. DESIGN • Gain stage designer: op-amp or single-transistor stage, with silicon, LED or germanium clipping to ground or in the feedback loop. Shows how much signal fits before clipping at 9 V and 18 V. • Tone controls: treble cut, two-knob bass and treble, and mid scoop, with response plots at several knob positions. • Transistor bias for BJT, JFET and MOSFET stages and followers, from your measured hFE, Idss and Vp, Vgs, or typical values. • Clean boost, op-amp and JFET buffers, and low-pass, high-pass and band-pass filters. • Standard E12 and E24 values with a nearest-value table, a schematic you can pinch to zoom, the formulas used, and one tap to send the parts to a parts list, a drilling layout or the power budget. DRILL • Drilling templates for nine common diecast enclosure sizes, from A-size to DD-size, with the dimensions from the enclosure maker's drawings. Edit any size to match your box. • Place footswitches, pots, jacks, LEDs, toggles and DC jacks on the top, ends and sides. Drag them or type exact positions. • Print 1:1 across Letter or A4 pages with centre lines, crosshairs, hole sizes, 50 mm and 2 in check rulers, and face labels that say which way is up. • Export SVG in millimetres for CNC or laser. • Layout check: holes off the face or too close to an edge or each other, and parts that hit the walls or each other inside the box. • Hole sizes with the range builders report, and your own measured sizes. Powder coat allowance. • Drill chart: fractional, number, letter and metric bits, with nearest-bit lookup. CALCULATE • LED resistor, voltage divider and bias, RC filters, op-amp gain stages with dB and corner frequencies, Ohm's law • Resistor colour bands, capacitor codes, pF/nF/µF, nearest standard values • Wire gauge: AWG to diameter, area and copper resistance POWER • Power budget for each output of your supply, with isolated or shared outputs and voltage checks • Battery life estimate • DC jack polarity: 9 V centre negative on a 5.5 × 2.1 mm barrel PARTS AND BUILDS • Parts lists with batch totals (×N), costs, suppliers and links. CSV import and export. • Stock on hand, shortfalls for each parts list, and an order list • Build log with stages, dates, serial numbers, test notes and photos WIRING • 3PDT true bypass with an LED, lug by lug, in both switch positions • Input and output jacks, a stereo input jack as the battery switch, and the battery snap • DC jack with series or shunt reverse-polarity diode • Status LED: lit when on, bi-colour or two LEDs, power LED • Buffered bypass, and relay bypass as a block diagram • A/B, A/B/Y and an effects loop • Expression pedal and tap-tempo jacks • 18 V charge pump from the chip maker's datasheet circuit, with the output voltage at your load ON THE BENCH • Pinouts for TO-92, SOT-23 and DIP-8 parts, taken from named maker datasheets, plus your own • Tone generator for tracing a signal through a build Every tool has a short guide and ⓘ notes on its fields. Works offline. No account, no ads, no tracking. Hole sizes and calculated values are starting points: check them against your parts and their datasheets, and on a breadboard. Pedals run on low-voltage DC; the app does not cover mains power supplies.

  • This app hasn’t received enough ratings or reviews to display an overview.

The developer, Nerd Alchemy LLC, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .

  • Data Not Collected

    The developer does not collect any data from this app.

    Privacy practices may vary, for example, based on the features you use or your age. Learn More

    The developer has not yet indicated which accessibility features this app supports. Learn More

    Seller
    Nerd Alchemy LLC
    Size
    8.5 MB
    Category
    Music
    Compatibility
    Requires iOS 26.0 or later.
    • iPhone
      Requires iOS 26.0 or later.
    • iPad
      Requires iPadOS 26.0 or later.
    • Mac
      Requires macOS 26.0 or later and a Mac with Apple M1 chip or later.
    • Apple Vision
      Requires visionOS 26.0 or later.
    Languages
    English
    Age Rating
    4+
    Copyright
    © 2026 Nerd Alchemy