Fieldpiece Job Link

Name: Fieldpiece Job Link
Rating: 2.6 (388 reviews)

Business

Free

388 Ratings
Ages

4+
Years
Category

Business
Developer

Fieldpiece Instruments
Language

EN
+ 11 More
Size

102
MB

The Fieldpiece Job Link System is a robust app used with our compatible HVACR wireless tools for troubleshooting, diagnosing and evaluating HVACR systems. Job Link is the HVACR Pros’ Hub for wireless tools and business solutions. Link your tools and your jobs.

Ratings & Reviews

2.6

out of 5

388 Ratings

Range is great but bugs with app need to be fixed
09/26/2018

75142
I’ve had the wireless charge and test kit for several months and have been overall pretty satisfied with the product. The range is great but the app needs some work. Several times recently when checking pressures/superheat the app randomly changed the PT chart without warning! R22 was selected but the PT Conversation was not correct(65PSI showing 27 degree conversion instead of 37degrees) it only corrected itself when I closed the app and reselect R22. If it wasn’t for the fact that I knew my PT conversion then I could have had big problems. Hopefully this is a issue that was resolved with recent update But if not please resolve. I have also recently added the air temp probes. The range doesn’t seem to be as good (like 1/2) and when I connect pressure,temp and air the app will not calculate superheat. If these issues are resolved I would gladly raise this rating from 3 to 5.

Developer Response
Hi, sorry for the inconveniences and the late reply. Our tools and app have gone through several iterations and improvements, and we are certain we provide a better experience now than we did before. If you are experiencing issues we encourage you to give us a call. Our phone number is 267.753.6000, we work Monday through Friday, from 6:30 AM to 5:30 PM EST.
Range is great but bugs with app need to be fixed
09/26/2018

75142

I’ve had the wireless charge and test kit for several months and have been overall pretty satisfied with the product. The range is great but the app needs some work. Several times recently when checking pressures/superheat the app randomly changed the PT chart without warning! R22 was selected but the PT Conversation was not correct(65PSI showing 27 degree conversion instead of 37degrees) it only corrected itself when I closed the app and reselect R22. If it wasn’t for the fact that I knew my PT conversion then I could have had big problems. Hopefully this is a issue that was resolved with recent update But if not please resolve. I have also recently added the air temp probes. The range doesn’t seem to be as good (like 1/2) and when I connect pressure,temp and air the app will not calculate superheat. If these issues are resolved I would gladly raise this rating from 3 to 5.
Developer Response 07/28/2021
Hi, sorry for the inconveniences and the late reply. Our tools and app have gone through several iterations and improvements, and we are certain we provide a better experience now than we did before. If you are experiencing issues we encourage you to give us a call. Our phone number is 267.753.6000, we work Monday through Friday, from 6:30 AM to 5:30 PM EST.
May be done with Fieldpiece....
09/14/2018

Andrej Fox
I’m taking the time to write this right now sitting in front of the unit as I have just spent an hour compiling a three system report with job link, only to find out that it did not save any of my pictures, refrigerant values, notes, or checklist for all three systems.I have ALL of the Fieldpiece stuff, the SMAN460 refrigerant gauges, the SC660 multimeter, the SDP2 digital psychrometer, and the JL3PR probe kit. I have convinced more than 2 company’s to go to all Fieldpiece stuff due to the amazing report it can potentially create. USING THE FULL VERSION, this has been beyond unsatisfactorily . Is this what I get for spending $2,000 for the “best” diagnostic tools available? Not to mention the thousands upon thousands others have spent from my recommendation which now makes me look stupid since the app is completely useless now apparently. I just promised this customer a full report and have to go tell them I cannot provide it due to the app being a complete failure. I can’t even retake value because I do not want to waste another hour of time here on it for it to most likely fail. All in all I may be switching the yellow jacket Bluetooth gauges and Testo from now on because I’m sick of this app having CONSTANT issues from day 1

Developer Response
Hi, we are sorry you've had such experience with our app. Job Link has been through several updates, and many issues have been weed out as a result. If you are still using our tools and run into any issues, I encourage you to give us a call to 267.753.6000, from 6:30 AM to 5:30 PM EST, Monday through Friday.
May be done with Fieldpiece....
09/14/2018

Andrej Fox

I’m taking the time to write this right now sitting in front of the unit as I have just spent an hour compiling a three system report with job link, only to find out that it did not save any of my pictures, refrigerant values, notes, or checklist for all three systems.I have ALL of the Fieldpiece stuff, the SMAN460 refrigerant gauges, the SC660 multimeter, the SDP2 digital psychrometer, and the JL3PR probe kit. I have convinced more than 2 company’s to go to all Fieldpiece stuff due to the amazing report it can potentially create. USING THE FULL VERSION, this has been beyond unsatisfactorily . Is this what I get for spending $2,000 for the “best” diagnostic tools available? Not to mention the thousands upon thousands others have spent from my recommendation which now makes me look stupid since the app is completely useless now apparently. I just promised this customer a full report and have to go tell them I cannot provide it due to the app being a complete failure. I can’t even retake value because I do not want to waste another hour of time here on it for it to most likely fail. All in all I may be switching the yellow jacket Bluetooth gauges and Testo from now on because I’m sick of this app having CONSTANT issues from day 1
Developer Response 07/23/2021
Hi, we are sorry you've had such experience with our app. Job Link has been through several updates, and many issues have been weed out as a result. If you are still using our tools and run into any issues, I encourage you to give us a call to 267.753.6000, from 6:30 AM to 5:30 PM EST, Monday through Friday.
Disappointed
02/22/2018

Scottnick41
To be perfectly honest, I’m pretty disappointed. And I’m not entirely sure if it’s an app problem or if it’s a tool problem.I just purchased the JL3KH6 wireless set and was super excited. It states that it has a 350 foot range which meant that I could leave the temp probes in the duct work while I was outside checking pressures to get real time updates and so forth...but the tools don’t stay connected to the app. I’m writing this review in an attic right now using this setup and am literally next to my temp probes and they keep disconnecting. My refrigerant sensors are on the unit outside and they keep disconnecting. I’ve got the app opened up on Two different devices, my personal phone and my company provided iPad. Both with different cellular services and it’s the same story on both. So again, not very happy, but not entirely sure who’s fault it is!!!I’ll be more than happy to change my rating once this issue is resolved, but just know that if it’s not resolved by this summer, Testo here I come!

Developer Response
Thank you for the feedback. Please contact me directly at tgonzalez@fieldpiece.com. I'd like to hear more about your issues and get you up and running.Once your issues are resolved, I hope you will consider updating your review. Have a great day!
Disappointed
02/22/2018

Scottnick41

To be perfectly honest, I’m pretty disappointed. And I’m not entirely sure if it’s an app problem or if it’s a tool problem.I just purchased the JL3KH6 wireless set and was super excited. It states that it has a 350 foot range which meant that I could leave the temp probes in the duct work while I was outside checking pressures to get real time updates and so forth...but the tools don’t stay connected to the app. I’m writing this review in an attic right now using this setup and am literally next to my temp probes and they keep disconnecting. My refrigerant sensors are on the unit outside and they keep disconnecting. I’ve got the app opened up on Two different devices, my personal phone and my company provided iPad. Both with different cellular services and it’s the same story on both. So again, not very happy, but not entirely sure who’s fault it is!!!I’ll be more than happy to change my rating once this issue is resolved, but just know that if it’s not resolved by this summer, Testo here I come!
Developer Response 07/03/2018
Thank you for the feedback. Please contact me directly at tgonzalez@fieldpiece.com. I'd like to hear more about your issues and get you up and running.Once your issues are resolved, I hope you will consider updating your review. Have a great day!
App goes haywire
04/15/2024

adam_hvac1
The app is straightforward and and easy to use, but has several major bugs that make it difficult to use. First, almost every time the phone display times out is is “woke” back up, all the readings start coming in and out making the display impossible to read. The only way to correct is to close app and restart.Second, if you loose connection with a probe, the display freezes at the last value instead of showing a no connect. If you don’t realize this has happened, you can easily overcharge a unit (happens with the scale, pressure probes, and temp probes). I’ve been thinking an update would come out to correct these seemingly simple to correct issues, but has not. The issues are consistent with multiple phones (all iPhones) with multiple phone software versions.

Developer Response
Thank you very much for your really valuable feedback! Apart from closing and restarting the app, have you tried deleting your cache/reinstalling the app? Readings coming and going are not a normal behavior of our app, neither probes disconnecting at any time after connection. We would love to help you sort this out. Could you please try a fresh reinstall in all devices and try to capture more info for us to further look into this? Is it possible to replicate this in a specific scenario or with a specific set of tools? Screen recordings/captures would be of help. Please send us an email at info@automateddecision.com. Thank you!
App goes haywire
04/15/2024

adam_hvac1

The app is straightforward and and easy to use, but has several major bugs that make it difficult to use. First, almost every time the phone display times out is is “woke” back up, all the readings start coming in and out making the display impossible to read. The only way to correct is to close app and restart.Second, if you loose connection with a probe, the display freezes at the last value instead of showing a no connect. If you don’t realize this has happened, you can easily overcharge a unit (happens with the scale, pressure probes, and temp probes). I’ve been thinking an update would come out to correct these seemingly simple to correct issues, but has not. The issues are consistent with multiple phones (all iPhones) with multiple phone software versions.
Developer Response 04/18/2024
Thank you very much for your really valuable feedback! Apart from closing and restarting the app, have you tried deleting your cache/reinstalling the app? Readings coming and going are not a normal behavior of our app, neither probes disconnecting at any time after connection. We would love to help you sort this out. Could you please try a fresh reinstall in all devices and try to capture more info for us to further look into this? Is it possible to replicate this in a specific scenario or with a specific set of tools? Screen recordings/captures would be of help. Please send us an email at info@automateddecision.com. Thank you!

We update the app regularly to improve your experience. This latest update includes: - Added range visualization for key performance measures in reports. - General fixes and enhancements

Version 5.6.0

09/18/2025

Data Linked to You

The following data may be collected and linked to your identity:
- Location
- Contact Info
- User Content
- Identifiers
Data Not Linked to You

The following data may be collected but it is not linked to your identity:
- Identifiers
- Diagnostics

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Accessibility

Information

Seller
Size
Category
Compatibility
Languages
Age Rating
Copyright

Developer Website

Privacy Policy

You Might Also Like

measureQuick HVAC

Connect. Perform. Prosper.
CE HVAC Pro+

HVAC Tools
CoolCloud HVAC 2.0

HVAC Service Streamlined
Trane® Technician

Business
Daikin Tech Hub

Business
Trane 360°

Business
testo Smart

Fast and reliable measurements
LennoxPros

Business
Symbio® Service & Installation

Business
FieldEdge

Business

Fieldpiece Job Link

Business

Ratings & Reviews

What’s New

Version 5.6.0

App Privacy

Data Linked to You

Data Not Linked to You

Accessibility

Information

You Might Also Like