- NEW: shutter button has been replaced by full-screen tappable text that you can customize - NEW: added a setting to have the app pause between photos when taking multiple photos (tap to continue) - IMPROVED: when a Print.Events printer gets connected after being disconnected, the app notices the change faster than before - FIXED: we reverted a change in the last update that caused your customized Gallery button to be a wrong size

- NEW: an LED setting for when the gallery is open - NEW: a setting to move the cards in the guest flow from the bottom of the screen to the top - NEW: guests can enter their info while they are waiting for AI Prompt images to load - NEW: support for Nano Banana Pro - FIXED: now you can print to Print.Events when your iPad has its hotspot turned on - FIXED: now you can add printers that require IPPS, like the Epson XP-7100 - FIXED: the app would erroneously say that local network access was missing if Personal Hotspot was turned on - FIXED: a rare crash when adding a printer - FIXED: the guest idle timer wasn't working for AI Prompt or AI Portrait flows - FIXED: when data collection was turned on after capture, there was no way to cancel all the way out of the flow - FIXED: when using Capture Station mode, data collection wasn't working for AI Prompts - FIXED: when using Capture Station mode and opening the Gallery from the in-event menu, tapping a photo wouldn't do anything - IMPROVED: if you have a lot of events on your account the app will load faster - IMPROVED: you can enable AI Portraits without needing to turn on email or text share actions

- FIXED: could not open in-event menu when Kiosk Mode was on - FIXED: a rare crash in the camera settings - FIXED: several crashes related to printing

- IMPROVED: the app will warn you if you haven't granted it local network access when you try to add a printer - IMPROVED: if you set a print limit on the event and the limit is reached, the print button will show a warning icon - IMPROVED: you no longer need to configure your ethernet settings if your iPad is connected to Print.Events over ethernet - IMPROVED: when taking multiple photos, the previews that show near the bottom look nicer - FIXED: an issue that could cause the app to take longer to start up - FIXED: if you closed the printer troubleshooter while it was pinging the app could crash - FIXED: on slower iPads the app could hang if you quickly exited the event after finishing a guest session - FIXED: a crash if printing with the foreground printing method - FIXED: several rare crashes from the device camera - FIXED: if you used a custom attract screen as the background of the homescreen you might briefly see a white flash when the user picks the capture type

- IMPROVED: adding & managing printers is easier than ever - NEW: printer job management for AirPrint printers - NEW: when selecting an AirPrint printer that offers multiple paper sizes/trays or margins, you can choose the specific option - NEW: see media count remaining for specific DNP printers connected with Print.Events - NEW: printer troubleshooter helps you figure out what's wrong when your printer doesn't appear in the list - NEW: hide printers you never want to add, so they don't bother you later - NEW: easily open your print server's page in a browser from the app (AircastPro, DNP WCM Plus, etc) - NEW: a setting to allow printing even when printer is in an error state (prints will queue in the app), which is on by default - NEW: when AirDrop is selected, the guest will see instructions on how to set their iPhone to "Everyone for 10 minutes" - CHANGED: the passcode is required to open the in-event menu, instead of only being required to exit the event. This prevents guests from messing with printer/camera settings if they discover the in-event menu. - CHANGED: the "brighten live view" camera setting now prompts you to help you understand you should be doing this on your camera, if your camera is capable. We also fixed an issue with this feature on slightly slower cameras like the M50. - FIXED: if an idle timeout fired in a certain configuration, the background would not show the liveview anymore - FIXED: an issue that could cause the camera to disconnect after the first photo of a series was taken - FIXED: an issue that could cause changing the camera settings to not work - FIXED: data collection after capture was not working for AI Prompts - FIXED: videos did not have sound in the in-app Gallery - FIXED: an issue that could cause the app to freeze if you had a lot of scenes available and guests chose many of them over time - FIXED: a crash if you had a background attract screen with a video, usually on devices with less RAM

- FIXED: a crash on app startup if your event had a lot of new things to download - FIXED: an issue that stopped the "Disable looks good screen" setting from functioning correctly - CHANGED: JPG DPI metadata changed from 144->300, to fix some print servers

- FIXED: the app could get stuck when making an AI photo if the generation process failed - IMPROVED: when choosing a template in the app, you can see which templates have AI prompts on them

- FIXED: attract screen would not show on macOS - FIXED: auto-generated GIFs became unstable in the last update - FIXED: salsa 1 LEDs would not connect if your device had been renamed away from its default. You may still need to contact support if your device has an unusual name. - FIXED: a crash in camera settings - FIXED: stickers weren't sorted - FIXED: if a guest walked away when the email/sms entry screen was showing, the idle timer would not fire - FIXED: in Capture Station mode the gallery could not be opened from the in-event menu

- NEW: we've added 2 more aggressive stabilization modes for slow-mos, and a setting to control stabilization. You'll find it in the middle page of event settings. - FIXED: the guest would be able to choose a color filter even though the template editor would show no color filters are selected - FIXED: if you set a very short guest idle timeout, it could get hit while a video was processing (ie. selecting a scene) - FIXED: AirDrop was not shown correctly on macOS - FIXED: if you turned on cropping of originals, auto-generated GIFs were broken. We've added a warning next to this setting: if you're cropping the originals, GIFs will only be auto-generated if your photo areas in your template are exactly the same size. - FIXED: if your first test capture in the camera settings failed, you would have to restart the app - FIXED: an issue that could cause a photo to fail to download

- CHANGED: you can't launch an event with a capture type (like "slow-mos") enabled if there are no templates that work with that capture type (for example, because you disabled that capture type in the only template's advanced settings) - FIXED: an issue that could cause the app to only show a spinner and not continue when pressing a capture mode like "Photo" - FIXED: the Send button was missing on an iPad Mini in landscape orientation when trying to enter a phone number - FIXED: the app could show an error message when trying to start a video, boomerang, or slowmo if the connected camera was older or slower - FIXED: the '+' button on the iPhone looked... gnarly - FIXED: the app did not allow email addresses with upper-case letters - FIXED: bad things would happen if you pressed two action buttons (like email + text) at the exact same time

- NEW: support for Bluetooth / LED controllers - Salsa 1 (SP-107E) & SP-630E - IMPROVED: the LED screen shows the same device identifier as shown in other apps (like LED Hue or LED Chord) - FIXED: an issue that prevented trimming videos that were longer than 1 minute

- NEW: you can trim video testimonials on the "Looks Good" screen (as well as boomerangs & slow-mos) - NEW: advanced capture controls setting for disabling liveview, which is useful for Nikon cameras that only allow tethered shooting (using the camera's shutter button) when liveview is turned off - IMPROVED: you can now sign in with email+password even if you have a Google/Apple sign-in on your account - FIXED: if you opened camera settings soon after camera connected, it would not show the slow-mo/video settings - FIXED: an issue creating GIFs when you set the originals to be cropped to template - FIXED: a workaround for an iOS issue causing old iPads, notably the iPad 10.5" Pro, to freeze after taking a photo - FIXED: missing Reshoot button when selecting a scene

- FIXED: "Looks good" preview screen allows trimming of Slow-mos and Boomerangs

- NEW: a capture setting to crop original photos - NEW: a setting to disable the "Looks good" preview screen - IMPROVED: if your device is in landscape orientation so it's hard to see your creation, the app will first show the "Looks good" preview screen before going to the sharing screen - IMPROVED: the app won't wait so long when your connected camera's autofocus fails (ie. due to low light) - FIXED: waiting uploads would not process if an event was launched and the uploads were from a different event - FIXED: if you had only one capture type enabled plus the gallery button enabled, the shutter button would get skipped - FIXED: on macOS several windows were the wrong size - FIXED: 2 rare crashes

- NEW: Make test slow-mos and test video testimonials on Camera Settings page to dial in your look - IMPROVED: if you remove a printer and later add it again, its settings (insets, which templates print etc) will be remembered - IMPROVED: you can choose which places autoprint happens: capture, share station, gallery - FIXED: the view showing the printers list could become unresponsive if the iPad could not communicate with Print.Events app - FIXED: a rare crash

- CHANGED: the "Max prints per session" setting now can be set to unlimited, and defaults to unlimited for new devices - FIXED: a crash on opening an old photo from the gallery - FIXED: the printer row could become unresponsive - FIXED: the app could show an error when changing from one capture type to another - FIXED: after capturing a boomerang, the capture could be lost - FIXED: on slower cameras, autofocus could function poorly - FIXED: the Auto Print feature did not respect the max prints per event setting - FIXED: when using the device camera, your video shutter speed would not be applied correctly

- IMPROVED: if you have a gallery passcode set and the "Show passcode with the QR code" setting turned on, the passcode will be shown on the Share Station near the QR code - FIXED: an issue that would cause nothing to happen when touching a photo/video in the Gallery or Share Station - FIXED: an issue that could cause your connected camera's liveview to stop working or not work well if you left the app and then returned to it - FIXED: the QR code popup would show an empty "Passcode:" if you turned the passcode for an event on, and then later turned it off again - FIXED: the local iPad gallery would show grey/empty squares if you deleted photos from the Camera Roll - FIXED: a rare crash that could happen when switching capture modes with a long pause in-between - FIXED: a crash that could happen when an invalid video file is loaded from a camera - FIXED: a crash that could occur if you had a poor internet connection and closed the gallery screen soon after scrolling or opening it

- NEW: you can set different settings for your camera (iPad or connected camera) for photos vs slow-mos vs videos. This is really helpful when you are using a flash for photos but constant lighting for videos. - IMPROVED: camera settings are applied to your connected camera more reliably, and we fixed issues with the Brighten Live View feature - IMPROVED: if printing via AirPrint in the background fails, the app will fallback to the iOS foreground print method instead of showing an error message - IMPROVED: video testimonials from your connected camera download much faster - CHANGED: the "brighten live view" feature will tell you to change your camera settings instead of emulating it in software, when the camera supports disabling exposure simulation - FIXED: if you created your account in a region other than the default, Cloud Gallery and Share Station were not working correctly when new photos arrived - FIXED: when using scene blending with SceneSelect, if your photo and scene were not the same orientation then the output did not look... great - FIXED: several issues that could cause the app to hang / freeze, or crash - FIXED: when connecting a slower (older) camera, now there's less chance of the camera failing to connect

- NEW: a setting for GIFs to add a countdown between photos - NEW: support for transparent scenes & blending with the photo background - IMPROVED: when in Capture Station mode, guests no longer have to wait for AI Portrait generation - IMPROVED: you can give the app add-only access to your Camera Roll - IMPROVED: the translations in the app have better quality, especially German - IMPROVED: the glam filter slider has a percentage indicator - FIXED: an issue causing slowness and crashes if you had gigantic galleries - FIXED: memory usage reduced, which fixes crashes on older devices - FIXED: shutter button is too big on iPhone - FIXED: after taking an AI Portrait not all of the actions are shown - FIXED: an issue with the Nikon D7200 - FIXED: hard to read the names of printers shared via Print.Events if the printer has a long name - FIXED: setting filters on a public template did not work

- NEW: new black & white filters, new sepia filter - NEW: advanced capture control settings for sharpening & video quality - NEW: you can pinch to zoom photos & videos after they are taken - NEW: setting to turn off in-event menu gallery buttons - NEW: setting to control which devices the attract screen shows on, per-event (for example, not on Share Stations) - NEW: setting for maximum number of prints per event (across all devices) - IMPROVED: video output from the app is higher quality, especially GIFs and boomerangs, and file sizes are smaller so your guests get them faster - IMPROVED: video testimonials can now be 5 minutes long - IMPROVED: glam filter and color filters are now set on templates, not the event as a whole. This lets you have different filters available for different templates. - IMPROVED: now you can select multiple color filters that your guests can choose from (instead of one or all) - IMPROVED: Print.Events error messages will give you more information about what is wrong - FIXED: several issues for Print.Events printers

- IMPROVED: you can now add Print.Events printers by IP address, and the app remembers the last IP address it connected to - FIXED: AI Portrait buttons on iPhone - FIXED: Canon T6 autofocus

- NEW: support for Print.Events, our new Windows print-server app - IMPROVED: the next version of Share Station is now available, with fluid scrolling & loading. New images/videos load in dynamically as your other devices upload them. - IMPROVED: the Gallery has new options to help you find what you're looking for faster, including grouping by session, sort order, and the ability to change the zoom (grid size) - IMPROVED: when the guest enters an email address or phone number, the confirmation dialog is easier for guests to understand - CHANGED: when you add templates, by default they'll print on already-added printers (before: they would not, so you'd have to choose to allow them to print) - FIXED: an issue affecting Canon T6 and T7 cameras - FIXED: the print popup could show even if printing was disabled, if you'd used autoprint before

- NEW: macOS support (beta), please see https://help.booth.events/article/106-how-to-install-booth-events-app-on-ios-and-macos for important considerations on macOS and how to install on Intel Macs, and please report any issues you find - FIXED: only the item printing is shown when you hit "Print" after taking more photos - FIXED: in some cases when taking multiple photos, the liveview guides were not in the correct places

- NEW: a setting to disable template preview during photo capture - FIXED: capture buttons could start scrolled off-screen on iPhone - FIXED: the in-event menu was small on iPhone in landscape orientation - FIXED: if you had a custom animated capture button, it could take a while after touching it until the touch was registered - FIXED: LED states for AI Portrait photos

- NEW: added 3 new LED states for AI Portraits - IMPROVED: we tweaked the photo quality to make it even better, especially for connected USB cameras - CHANGED: when printing from the gallery opened from the in-event menu, max print copies is not enforced - CHANGED: instead of removing the print button when the max print copies is reached, leave it there and show an alert when the user tries to print again - FIXED: device camera settings would not be applied correctly when an attract screen without liveview was closed - FIXED: the attract screen won't immediately open after guests close the gallery, if they were hanging out in the gallery for a long time - FIXED: if you delete photos/videos from your Camera Roll, the app won't show you annoying grey squares in the local gallery - FIXED: a problem that could cause the attract screen not to show - FIXED: using data collection + the take more feature + shooting from a tethered camera - FIXED: an iPhone in landscape orientation would display the in-event menu wrong - FIXED (1.41.4): an issue that caused liveview to be off-center for some templates