Invisible to thieves. Visible to everyone: Mark eBike as stolen In the event of theft, you can mark your eBike as stolen in the eBike Flow app – it's really easy and takes just a few clicks. This increases your chances of getting your eBike back. At the same time, it makes stealing your eBike unattractive to thieves. Should anyone try to connect to the eBike, perhaps after an attempted resale, its stolen status will be instantly revealed. This will for example be clear to eBike dealers, other eBike Flow app users, and second-hand buyers. If your eBike battery is stolen, you can also mark it as stolen as an individual component. To mark your eBike as stolen, go to Settings in the eBike Flow app. You can also mark your eBike battery as stolen in Settings, in "Components". You then have the option of creating a theft report so that you can report the incident to the police and, if necessary, your insurance company. It's therefore essential that you fill out the eBike pass, because the theft report uses the data on this. You can only mark an eBike or eBike battery as stolen if you, as the main user, have registered your eBike in the eBike Flow app. If your eBike or eBike battery is recovered, you can unmark it in Settings in the eBike Flow app.

More power when it counts 7.05 lbs (3.2 kg) Set up to 400% support and 60 Nm torque in the custom riding modes of the eBike Flow app* when you want it – or permanently. The higher torque gives you stronger acceleration. The increased support quadruples your own power.  Make your display unique The Kiox 400C always shows you exactly the information you need – so your focus stays on the trail. You can now configure your display to suit your preferences using the eBike Flow app – just like with Kiox 300 and Kiox 500. With over 30 customization options, you decide for yourself what you see on your display while riding. For the Kiox 300, Kiox 500, and Kiox 400C, you can now define even more precisely how the tiles are arranged on your display. With nine new configuration options, you can customize your display even more – and arrange the information exactly how you want to see it while riding. This means you can see all important information at a glance. In the eBike Flow app settings, you can use the “Display configuration” function to add content, change or delete screens, and determine their order and layout in the usual way. Follow your original route Import your route, for example from komoot, and follow it exactly – without automatic rerouting. With the new “Follow original route” button, you can ensure that you stay on your originally planned route – even if it takes you along unknown paths. This means you can follow exactly the same route as your friends, for example. You only see the route line on your display and navigate without voice navigation and turn-by-turn directions. The “Follow original route” button is displayed in the settings of your imported route. When you activate it, you will receive a warning that the route may contain sections that are difficult to navigate. Shift gears even more comfortably and conveniently with eShift Our eShift portfolio continues to grow and many new features are now available for eBikes with the smart system. Our new solutions give you more options for comfortable gear shifting – and more flexibility when choosing your eBike. In the eBike Flow app settings, you can add the respective eShift solution via Component > “eShift”. Find the right solution even faster An error code is now shown as a QR code on your display. Simply scan the QR code – and the appropriate page will open in the Help Center with a description and possible solution steps. Save your preferred dealer You can save your preferred Bosch eBike dealer on the home screen of the eBike Flow app so that you have all the important contact details quickly to hand. Your trusted dealer can now also save this information in their Bosch diagnostic software. But ultimately it's up to you to decide who your preferred dealer is. Further improvements We have made further improvements to the eBike Flow app to make it even easier for you to use. The settings are arranged in clear clusters with new headings – so you can always keep track of things. *Maximum values: Deviations possible, depending on hub gear system and battery. Higher performance values also mean higher wear and lower range – we leave this individual decision up to you. The eBike manufacturer can limit the maximum performance values in the factory setting. 250 W The “Y” in the product code is a placeholder and may contain a different number depending on the model, e.g., BDU3140.

In this version, we have fixed a bug in the 3D map display and improved the stability of the connection with your eBike.

In this version, we fixed a bug that caused unexpected crashes.

More power when it counts. In everyday life and for your adventures.  Our Drive Units are getting stronger: More power, more torque or a higher support factor. You decide if and when to set these performance values in the eBike Flow app.* You can adjust the performance values for the following Drive Units of the smart system: • Cargo Line (BDU384Y) • Performance Line PX (BDU347Y) • Performance Line Speed (BDU388Y) • Performance Line CX (BDU384Y) • Performance Line CX (BDU374Y) This is how it works: After the update, you can set the performance values via the custom riding modes. The individual values can be adjusted using Sliders. A new Tile: “Max. power (watts)”. Here you can set the maximum power in 25 watt increments. Note: For Performance Line CX (BDU384Y) you may need to follow additional steps. Follow the instructions in the eBike Flow app. Share your eBike. With family and friends. Sharing is fun. And that's true of biking too. Starting now you can share your eBike with up to five individuals. So they too can enjoy an even better riding experience with the eBike Flow app. To share your eBike with friends and family, you are the only one needing a Flow+ subscription – not the invited Secondary users or guests.*** You stay in control as the Main user. You are the only one who can activate or deactivate important functions, adjust basic settings, carry out over-the-air updates and store data in the eBike Pass. The invitation is sent via a link that you can create in the eBike Flow app. To do this, open the “Share eBike” menu item in the eBike settings and tap “Create invitation.” The invited individuals only have to accept the invitation and connect the eBike. Lock the battery digitally. Park your eBike with even greater assurance. With Battery Lock, you can also digitally protect your eBike battery: If it is stolen, this function deactivates your battery and makes it useless to thieves. This way you can protect one of the most expensive components on your eBike and park it with more peace of mind. You get Battery Lock exclusively with the Flow+ subscription.*** This is how it works: Select the battery you want to lock in the settings of “Lock & Alarm.” Battery Lock activates automatically as soon as you switch off your eBike or remove your display – like the eBike Lock. You can use several digital keys at the same time: Your smartphone with the eBike Flow app and your Kiox 300 or Kiox 500. With the eBike Flow app, you can manage your digital keys or switch off Battery Lock again if you want to share your battery, for example. Your annual overview at a glance Flow+ provides you with an Annual overview of your rides.*** This allows you to track your progress over the years. The overview of the most important riding data by year is right at the top of your statistics. It shows you the total number of trips, distance traveled, trip time, elevation gain and CO2 savings. These valuable statistics are linked to your Account and apply to all eBikes registered in the eBike Flow app. Your route. In 3D. The ride screen now offers you a 3D map display of the terrain. You can find your way around the city even better thanks to the 3D representation of prominent buildings. You can also use the 3D map display without active navigation and for route planning. This premium service is available to you with the Flow+ subscription.*** *Higher performance values also mean higher wear and lower range – we leave this individual decision up to you. The eBike manufacturer can limit the maximum performance values in the factory setting. In the eBike Flow app, and then you can only set the maximum values specified by the manufacturer. ***The Flow+ subscription is subject to a charge. Use of Flow+ is subject to the General Terms and Conditions (GTC).

In this version, we have made minor improvements. We also fixed a bug that caused unexpected logouts.

One account – multiple eBikes: the eBike Flow app is your digital garage You can now add up to six eBikes to your account. A new function on the home screen allows you to manage all your eBikes. This is how it works: when you have connected your first eBike to the eBike Flow app, a new button appears in the top left-hand corner of the home screen. This will take you to the overview, where you can manage all your eBikes. Give your eBikes custom names to make it easier to tell them apart. In the eBike Flow app settings, you can define your own name using the pencil icon. To make full use of all the functions of the eBike Flow app, like digital theft protection with eBike Lock or updates over-the-air, you'll need to register each of your eBikes. You can continue to use all your usual functions. The different configurations of your eBikes will be stored for you. One thing is important if you want to evaluate your ride data: the information on the home screen pertains to the eBike currently selected. But your activities, which you can find under Statistics, are linked to your account and relate to your rides no matter which eBike you used. You can also use our Flow+ premium services with all your eBikes. Do you want to experience the full scope of Flow+? For eBike Alarm or the current charge level, a ConnectModule must be installed on the respective eBike. You can easily check whether your selected eBike is equipped with it in the eBike Flow app: just go to the gear icon > eBike Pass > Components. All the important settings can be accessed even faster Now you'll see all the eBike-related settings in the home screen at the top right behind the gear icon. There you can personalize your eBike as usual or adapt your riding modes to your individual needs. Your profile settings, including the options for Flow+, can now be found at the bottom right of your screen under "Profile". eShift with TRP: store shifters in the eBike pass Is your eBike equipped with the eShift electric gear shifting solution with TRP? Then you can now add the TRP shifter as a component in your eBike pass in the eBike Flow app. With the eBike pass, you can keep track of all the important information about your eBike – so you always have all the data at your fingertips.

eShift with Rohloff E-14 For the Rohloff E-14 eShift solution, you can now use the eBike Flow app to set the gear to automatically downshift when starting off – even when stationary at traffic lights, for example. You can find this function in the eBike Flow app settings under My eBike > eShift. To use automatic downshifting with Rohloff E-14, you also need to update the firmware from our partner Rohloff. This firmware update will be available in the next few weeks. "Live Sync" from komoot with the eBike Flow app – ready to go with just one click Together with our partner komoot, we have worked on making it even easier for you to start your route planned with komoot using the eBike Flow app. That's why we have integrated "Live Sync" from komoot into our eBike Flow app. This is how it works: Once you have planned a route with komoot, simply click on the "Navigate with Bosch eBike Flow" button. You will then receive a push notification from the eBike Flow app, which you can use to start your route. "Live Sync" is optimised for group rides. The organiser shares the route via komoot – and all participants receive a push notification from the eBike Flow app to start the route. You also have the option of adapting your route on the go: open the route in komoot, add stopovers or re-plan it – and the new route is available in the eBike Flow app. One more thing: in future you will find inspiration for your routes. In the planning view and under "My routes" you will see a banner with interesting routes in your neighbourhood. This feature will be available from the beginning of February. Your route at a glance in the ride screen Get an overview of your route in the ride screen with just one click. With one button you can easily switch between two views: your current, centered position with the usual navigation and – something new – an overview of your route, which automatically zooms out with just one click. eBike Flow app with Apple Watch Series 3 or older In order to provide you with a unique experience in terms of functionality and performance, the eBike Flow app will only support Apple Watch models from Series 4 or later in future. Unfortunately, owners of an Apple Watch Series 3 or older will not be able to receive any further updates for the eBike Flow app for this device.

Thank you for using the eBike Flow app! In this version, we have only fixed minor bugs and made a few improvements. We hope you continue to enjoy your eBike.

Thank you for using the eBike Flow app! In this version, we have fixed bugs and made improvements, for example, ABS mode selection is now available from the eBike Flow app again. We hope you continue to enjoy your eBike.

Thank you for using the eBike Flow app! In this version, we have fixed bugs and made improvements. We hope you continue to enjoy your eBike.

• Flow+: With immediate effect, you can use two of the Flow+ subscription's functions without the ConnectModule. "Extended navigation" and "additional statistics" are now available to everyone who wants to get even more out of their eBike with Flow+. Thanks to the free trial period, you can try out the new premium services. Take this opportunity to get to know Flow+. Your eBike must be equipped with the ConnectModule in order to use the Premium Service eBike Alarm and "Current charge level". Your specialist dealer or eBike manufacturer can tell you whether your eBike is compatible with the ConnectModule. You also have the option of checking in the eBike Flow app under "My eBike > eBike Pass > Components" whether the ConnectModule can be retrofitted to your eBike. The Flow+ subscription is subject to a charge. When using Flow+, the General Terms and Conditions (GTC) apply. The Flow+ subscription is automatically renewed as long as you do not cancel it. Cancellation takes effect at the end of the subscription period you have selected. • To the ride screen with just one click: Thanks to a new button, you can now access the ride screen from anywhere with just one click – no matter where you are in the eBike Flow app. The button adapts its appearance depending on the activity or eBike status. It also adapts its colour to the selected riding mode. An animated effect around the button indicates that activity tracking is activated and your ride is being automatically recorded.

Extended navigation: Better orientation and more precise navigation An even more detailed map view for your Kiox 300 and Kiox 500 provides improved orientation and more precise navigation. Now you can see not only your route and intersections, but also the entire road and path network. Current charge level: convenient route planning from your sofa Keep an eye on the current charge level of your battery in the eBike Flow app at all times and check when it is fully charged from your sofa. Additional statistics: Analyse your own rider power and riding mode usage After your ride, you can analyse how your own rider power compared to the motor power and which riding modes you used and how often. To use Flow+, your eBike must be equipped with the ConnectModule. Your specialist dealer or eBike manufacturer can tell you whether your eBike is compatible with the ConnectModule. You also have the option of checking in the eBike Flow app under "My eBike > eBike Pass > Components" whether the ConnectModule can be retrofitted to your eBike. Improvements Custom riding modes: If a new riding mode is available for the smart system, you can currently only obtain it from your specialist dealer. From version 1.23, it is possible to obtain additional riding modes such as Eco+ or Auto via the eBike Flow app. Download the latest version as soon as it is available and update your eBike. You then still have the option of putting together your four favourite modes. Which riding modes are available to you depends on the drive unit and the eBike category. The bicycle manufacturer can also exclude certain riding modes from the configuration ex works. Account: With the eBike Flow app, all your data and settings are retained because they are now stored in the cloud. Simply log in on your new device and pick up where you last left off.

Range Control – never worry about battery range again Plan routes with freedom and flexibility, without range anxiety – and enjoy the ride without having to worry about the battery status. Thanks to artificial intelligence, the new Range Control function now makes this a reality.* When you plan a route with the eBike Flow app, you can see straight away how much battery capacity will remain when you reach your destination in your chosen support mode. With Range Control, you can now decide for yourself how much (minimum) battery charge you need to reach your destination. Depending on your choice, you will see whether you can travel your route with full, low or very low support. During your ride, the support from the Drive Unit is then adapted to ensure the desired battery status on arrival. Here's how it works: To display the most accurate range possible, your eBike uses the smart system to find out various pieces of information. The system weight, for example, or the elevation graph of the route and your individual riding style on your last rides. The predictions become more and more precise: once the first activities have been recorded, the eBike Flow app can determine the battery status on arrival much more accurately than before. *Range Control does not work with S-Pedelecs and is not available for Auto mode. Purion 200 – configure your display On asphalt or on trails: on your display, you want to see the information that suits your current riding situation and route. That's why we now also let you configure the display of the Purion 200. Using the eBike Flow app, you can add content, change or delete screens and determine the display sequence yourself. With more than 30 types of information available plus individually customisable displays, the Purion 200 can now also become your personalised display. CO2 savings in the statistics Sustainability is important to us. That's why from now on, as soon as you've finished your ride, you'll be able to see in the statistics how much CO2 you've saved compared to travelling the same distance by car. We've also made some minor improvements. For example, you can now set the ride screen to your favorite format. Note: After you have downloaded the new version of the eBike Flow app, update your eBike with the smart system using the eBike Flow app. This way you can take advantage of all the features and improvements we have listed here. Please ensure that all the components are attached to your eBike before updating it.

To offer even more eBike enthusiasts – and those who ride with their phone vertically on the handlebar – an even better, smart riding experience, the Ride screen is now also available in portrait format, with all important riding data at a glance: 3D map display, turn-by-turn directions via acoustic signal or voice output, Quick Menu for flexible destination changes, elevation graph, and heart rate monitor. Controlling your phone as an eBike display works with the LED Remote, Mini Remote, or Purion 200, allowing you to stay focused on the ride and keep your hands on the handlebar. You can access the Ride screen as before: Open the "Ride" section in the eBike Flow app and tap on the black bar at the bottom of your phone screen to open the "Ride" screen.

Quickly back to your planned komoot or GPX route As eBike-fans we know the problem: you're enjoying the view or the landscape – and then you simply miss the next turn and deviate from the planned route. You need to reroute – now this feature has been fundamentally improved for imported routes (from komoot or via GPX file). If you deviate from your planned route, we will automatically calculate the best way back to your original planned trip. Once you're back on your original route, it will be displayed again as usual. eBike Flow app with iPhone 7 or older With every update, we optimize and improve the eBike Flow app. In order to offer you a unique experience in terms of functionality and performance, in future the eBike Flow app will only support Apple versions from iPhone 8 onwards with iOS 16 or higher. Unfortunately, owners of an iPhone 7 or older will no longer be able to receive further updates for the eBike Flow app. Once you've downloaded the new version of the eBike Flow app, update your eBike with the smart system using the eBike Flow app. This way you can take advantage of all the features and improvements we have listed here. When doing this, please make sure that all components are attached to your eBike before you update it.

In this version we have fixed bugs and improved functions. In addition, new information is now available in the 'Digital Service Book': Your specialist dealer can check and report on the performance of your battery. In future, this test result will also be displayed in the digital service book.

Thank you for using the eBike Flow app! In this version, we have fixed bugs and made improvements. We hope you continue to enjoy your eBike.

After you have downloaded the new version of the eBike Flow app, update your eBike with the smart system via the eBike Flow app. This way you can take advantage of all the features and improvements we have listed here. Please make sure that all components are attached to your eBike before you update your eBike. Kiox 300 and Kiox 500 – think dynamically like you. With our new "dynamic screen" function, you automatically receive the information that suits your current riding situation: When you ride uphill, you see your power, your cadence and the elevation covered. You may be asking yourself: how does my eBike know whether I'm riding uphill, downhill or on a level surface? Your drive unit recognises the gradient value, sends it to your display – and your Kiox 300 or Kiox 500 shows you everything automatically. In the settings of the eBike Flow app under "My eBike" > "Display configuration" you can activate the dynamic screen. To do this you have to create it as a new screen. Before riding, you select the dynamic screen on Kiox 300 or Kiox 500 and the rest is automatic. Whether belt, band or smartwatch: heart rate monitor in the smart system The community has spoken – and we've listened to you: A popular feature is now coming to the smart system. With immediate effect, you can connect your heart rate monitor to your eBike via Bluetooth and track your heart rate on Kiox 300 or Kiox 500 while riding. To connect, you use the eBike Flow app. Here's how it works: For example, have your chest strap ready, go to the eBike Flow app settings under "My eBike" > "eBike Pass" > "Components" and add your new device. Please note that the device must be in connection mode to be paired. In addition, you must actively add this new screen on Kiox 300 or Kiox 500 – via the "Display configuration" function under "My eBike". Uphill, downhill: Discover the elevation graph of your next ride With immediate effect, you can keep an eye on the elevation graph of your current ride on Kiox 300 or Kiox 500 and be pleased with what you have already achieved. While you navigate, your display also shows you which ascents and recovery phases await you. The new “Elevation” screen can also be added in the eBike Flow app using the “Display configuration” function under “My eBike”. And don't forget: there must always be a connection between the phone and eBike in order to utilise the benefits of this function. Favourite riding modes – put together what suits you best. With this update, we give you the opportunity to put together your four favourite modes from all the riding modes available for your eBike – and customise them as usual. Instead of the economical Eco mode, you can use the Auto mode, for example, which automatically adapts the support to the environmental conditions. You can find this new function on the home screen or in the settings of the eBike Flow app under “Individual riding modes”. Turn support into motivation. New displays for Kiox 300 and Kiox 500: “Use of riding modes” and “Power share” Two new screens for Kiox 300 and Kiox 500 now show you how you are doing on your current ride. Simply select the appropriate riding mode while riding and you will see how your own performance compares to the motor support. To see the "power distribution" in percent in the display, use the screen of the same name. Maybe this will motivate you to achieve your fitness goal next time with less support from the electric motor. You add the new screens using the display configuration function under “My eBike”. Navigate flexibly while riding: Quick Menu for Kiox 300 and Kiox 500 You can customise destinations by starting navigation to one of your most recent destinations. You can also stop your currently active navigation. To do this, hold down the selection button of the LED Remote, Mini Remote or Purion 200 for longer than one second without removing your phone from your pocket.

Always at hand: the digital eBike pass: With the eBike pass you receive an overview of important information about your eBike. Data about your eBike, such as the model and installed components, is stored here. You can also add further details manually, for example your eBike's frame number, documents and special features. This not only helps your specialist dealer with questions about your eBike, but also comes in handy if it is stolen or you sell it because all the relevant information is immediately to hand. You can find the eBike pass in the settings of your eBike Flow app under “My eBike”. Here, you can also store the most important information and documents. Tip: Take a photo of your eBike right now and save the image in the eBike pass. Rapid assistance with the theft report: Time is ticking away. If someone steals your eBike, you need to act quickly and report it to the police. With the theft report, you can respond immediately. That way, you increase your chances of getting your eBike back. In the event of theft, a document can be automatically produced with all important information about the incident and details of the eBike. This theft report uses the data entered from the eBike pass function. With eBike Alarm, you can also add the most recent location or a live tracking link. You can report your eBike as stolen in the settings of the eBike Flow app under “My eBike". Enter the time and location and describe the incident. To make it easier to reach you, fill in your details with your name and phone number. The theft report automatically adopts further information from the eBike pass. It's therefore best to fill it out right away. Further improvements: To access your eBike's settings even faster, you can now tap on the eBike image or your name on the home screen.

Thank you for using the eBike Flow app! In this version, we have only fixed minor bugs and made a few improvements. We hope you continue to enjoy your eBike.

Flexible navigation as you ride: quick menu in the ride screen Would you welcome the flexibility to change your navigation destination while riding without having to stop? The new Quick Menu in the Ride screen makes this possible. You can customise destinations by starting navigation to one of your most recent destinations. You can also stop your currently active navigation. To do this, hold down the selection button of the LED Remote, Mini Remote or Purion 200 for longer than one second without removing your smartphone from the mount. But be careful: keep your hands on the handlebar. After all, this feature was developed for your safety. Change destination, maintain an overview, ride safely. From A via B to C - adding stopovers A refreshing stopover by a lake, followed by a detour to a beer garden - sounds like the perfect day, doesn't it? The advanced route planning of the eBike Flow app lets you incorporate such moments into your rides more effectively. Design your route exactly the way you want it and incorporate individual stopovers with ease. The choice is yours: set your stopover directly on the map by pressing and holding or using the "Add destination" option. Our navigation system reliably guides you through your route - to every stopover, every new discovery and every highlight along the way to your final destination. Up high: displaying the elevation profile directly during your ride Conquer new heights and master every challenge. The elevation profile on your Ride screen now shows you during the ride what you have already achieved and what still lies ahead of you. The graph shows differences in altitude over the course of your ride. This means you know immediately which climbs and recovery phases still await you. Ideal if you want to keep an eye on your performance - completely in the flow. Now fully integrated: eShift with enviolo Automatic gear shifting is now possible with enviolo. Set your desired cadence directly in the Quick Menu on the Ride screen. The continuously variable shifting system with eShift responds fully automatically. This ensures you always ride in the right gear with an even cadence. You can now add eShift as a component to the eBike Flow app. Keeping a close eye on your pulse: Heart rate from Apple Watch on Kiox 300 or Kiox 500 You can now keep an eye on your heart rate without having to constantly check your Apple Watch. The Apple Watch measures your heart rate and the Kiox 300 or Kiox 500 displays it. To do this, create a new screen with the display configuration in the eBike Flow app before your ride. This requires you to connect your Apple Watch in the eBike Flow app settings under "Connected services". You can track your heart rate directly on the handlebar and optimise your training without looking at your wrist.

Thank you for using the eBike Flow app! In this version, we have only fixed minor bugs and made a few improvements. We hope you continue to enjoy your eBike.

We have made some improvements in terms of stability and performance.

As varied as your routine eBike life - customised display Whether you're on the way to work, on windy trail rides or exploring new routes: every moment on the eBike is unique. This deserves an equally unique display. The Kiox 300 or Kiox 500 lets you decide what you want to see. You can customise existing screens directly in the app - from the ride data displayed to the sequence of information. But why not take things even further? With more than 30 items of information available and customisable ads, you can create your own personal display. Choose between layouts with one, two or three tiles and set everything up according to your preferences. This ensures you always have an overview of what is important to you. Taking security to the next level You may already be familiar with our eBike Lock function, which turns your smartphone into a digital key. We take things one step further: This update gives you another "key option" for securing and unlocking your eBike - the Kiox 300 or Kiox 500. This feature is the intuitive way to protect your eBike. How does that work? It's as intuitive as it sounds: simply remove the display from the mount and stow it safely. Motor support is now deactivated and your eBike is protected against theft. Want to saddle up for your next ride? Reinstall the display and use it to activate motor support. Intuitive handling, simple security. Share the riding fun, not your smartphone - Kiox 300 and Kiox 500 as the key Love spending time on your eBike and want to share the enjoyment with family or friends? This is now much easier. You can set up multiple displays as keys for an eBike without having to hand over your smartphone. This option is available with the Kiox 300 or Kiox 500. It makes it easier for others to use and ride your eBike. You can find this function in the eBike Flow app settings under My eBike > Lock & Alarm. Full control using smartphone unlocking - twice the security We don't want to compromise on theft protection - even if your mind is somewhere else during your coffee break. The new update adds an extra layer of security to close this gap. As you relax in your favourite café with your eBike parked outside, you can use the "Hold to unlock" button in the eBike Flow app to make sure that no one unlocks your eBike unintentionally. Simply deactivate the "Automatic unlock" function in the settings and your eBike will remain locked. When you are ready to continue your journey, simply press and hold down the "Hold to unlock" button to manually unlock your eBike. A short beep confirms unlocking. This is how we combine comfort and safety - just as you expect from your eBike experience.