Quickly and easily connect and control your devices from a single app!
Control your Samsung Smart TVs, appliances, and SmartThings-compatible devices
With SmartThings, you can connect and control multiple devices quicker and easier. No matter where you are, you can monitor and control smart devices, home appliances (refrigerator, wine cellar, washer, dryer, oven range, dishwasher, cooktop, robot vacuum, air conditioner, air purifier and etc.), TVs, and speakers registered on the server.
- Remotely control and check the status of devices registered through a Wi-Fi AP.
- Group multiple devices into a Mode and control them simultaneously.
- Configure your device settings, including the time and operating conditions, and operate them automatically.
- Invite others to a location where devices are registered to enable shared control.
- The notification feature allows you to receive status information about your device.
※ Some features may not be available in all countries.
Some mobile devices may not be supported.
- iOS 10.0 or later / iPhone 6 or later / iPad mini2 or later
※ App permissions
The following permissions are required for the app service. For optional permissions, the default functionality of the service is turned on, but not allowed.
[Required access permissions]
• Bluetooth : Find nearby devices using Bluetooth or BLE.
• Microphone: Used to set up ultrasonic sensor-equipped devices
[Optional access permissions]
• Camera: Scan QR codes.
• Location: Automate actions using GPS. (GPS is optional.)
Find Wi-Fi information to add device in iOS 13 or later.
• Contacts: Verify user information that will be delivered while sending SMS.
We've been listening to your feedback and are excited to share with you a few new features and upgrades.
- Support additional devices
Ratings and ReviewsSee All
Fixed my issue with alarm notifications and appreciate the other improvements made with the April release. Thanks.
In most part I’m 100% in agreement with the previous review about the new Feb 2019 update. However, once I changed(Reorder) the home page, I do not have the issue with my home page resetting back to the default after I close the app & then reopen it on my iOS device. And who uses the term “Reorder” to to identify the procedure to rearrange, edit or manage the home screen? I originally thought it was for reordering of more devices. I do agree there is too much wasted space and would prefer the information being a little more condensed vs. having to scroll down the page. And, I also agree with the alerts/alarms. I’ve checked my settings numerous times, but if my iPhone is locked or if I do not have the App open, I do not receive /hear any notification from the App of a sensor being tripped. Notification can be resolved with IFTTT but would think the App itself would be able to provide that notification. I would the ability to remove a room from the home page, but have yet to find a way to do so. I do appreciate the improvements that Samsung made in an effort to improve the App and suspect there is a learning curve on my part, but I would like the user to have the capability/flexibility to manage their home screen the way the user wants it vs how Samsung thinks it should be.
Developer Response ,
Hello! We are sorry for the inconvenience caused and we will take this as feedback. Please contact us at email@example.com for the concerns regarding the SmartThings app with detailed description for assistance.
I’m impressed that Samsung keeps working to improve the app. My concern is they think (IMHO) that this is all about automation. Well it is called home automation, but it is also about keeping an eye on your home while you’re away for any major issues. I am fortunate enough to have my home in Florida and a cottage in Michigan. I think you’ll know where I am in the summer and winter. I monitor the home in Florida for humidity (I don’t want mold), temperature and water leaks. In the winter I monitor the cottage for temperature and water leaks. The new and classic SmartThings app needs to have better notifications. How about a badge on the app icon if there is something out of range? How about having the ‘tiles’ in the app change color to red if a sensor has a warning (the little red dot isn’t sufficient)? Those are just two little things that would make the app more useful and user friendly. I believe that it would be more helpful if at a glance the end user can see if the lights are on, there is motion, the dishwasher is leaking, the air conditioner isn’t keeping the humidity down... you get the idea.
Developer Response ,
Hi, Thank you for the review. We consider this as a feature request and send it to our development team so that they might consider adding this in future updates. If you need any assistance regarding SmartThings, please contact us at firstname.lastname@example.org so that we can assist you accordingly.
Removed functionality without notice!
In 2017 I purchased 2 multi-purpose sensors. They were great on garage doors. Once connected to the hub, it was less than 30 seconds to attach to a garage door and they did a great job of indicating the door was open when horizontal and closed when vertical. No more wondering “did the door close?”, a notification indicated closed and was part of my security system to indicate someone had opened the door. Sometime in January 2020 the app made the sensor a bi-purpose sensor only. No warning or notification! The tilt function removed! I went back to the classic app at suggestion of Samsung support (very time-consuming as I had to reset the hub and then had to completely re-add ALL sensors/lights etc... to BOTH apps!). No tilt in old app either. I attempted to connect one sensor as a contact sensor but with the rails and wheels, this was very difficult (the WHOLE reason the tilt function was so great!). Also once it was installed as a contact sensor, it only took one opening of the garage door to knock the magnet off somewhere along the path and jam the door! I’ve spent at least an hour re-doing both apps and reinstalling a sensor and still have no solution! I reluctantly give 2 stars because it was a great, simple solution for 2 years. I suppose if I buy a newer version of the multipurpose sensor it might work?!??! NOT going to keep buying sensors and I have guarantee that will even work and for how long?
Developer Response ,
Hi! The option has been removed from the Classic app. But we are constantly working on to add more features in the new app in the upcoming update. I have forwarded this review to R&D. Hope you will be seeing this feature in the upcoming update of the new app.
- Samsung Electronics
- 553.5 MB
Requires iOS 10.0 or later. Compatible with iPhone 5S, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, iPhone SE (1st generation), iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE (2nd generation), iPad Air, iPad Air Wi‑Fi + Cellular, iPad mini 2, iPad mini 2 Wi‑Fi + Cellular, iPad Air 2, iPad Air 2 Wi‑Fi + Cellular, iPad mini 3, iPad mini 3 Wi‑Fi + Cellular, iPad mini 4, iPad mini 4 Wi‑Fi + Cellular, iPad Pro (12.9‑inch), iPad Pro (12.9‑inch) Wi-Fi + Cellular, iPad Pro (9.7‑inch), iPad Pro (9.7‑inch) Wi‑Fi + Cellular, iPad (5th generation), iPad (5th generation) Wi‑Fi + Cellular, iPad Pro (12.9‑inch) (2nd generation), iPad Pro (12.9‑inch) (2nd generation) Wi‑Fi + Cellular, iPad Pro (10.5‑inch), iPad Pro (10.5‑inch) Wi‑Fi + Cellular, iPad (6th generation), iPad Wi‑Fi + Cellular (6th generation), iPad Pro (11‑inch), iPad Pro (11‑inch) Wi‑Fi + Cellular, iPad Pro (12.9‑inch) (3rd generation), iPad Pro (12.9‑inch) (3rd generation) Wi‑Fi + Cellular, iPad mini (5th generation), iPad mini (5th generation) Wi‑Fi + Cellular, iPad Air (3rd generation), iPad Air (3rd generation) Wi‑Fi + Cellular, iPad (7th generation), iPad (7th generation) Wi‑Fi + Cellular, iPad Pro (11‑inch) (2nd generation), iPad Pro (11‑inch) (2nd generation) Wi‑Fi + Cellular, iPad Pro (12.9‑inch) (4th generation), iPad Pro (12.9‑inch) (4th generation) Wi‑Fi + Cellular, and iPod touch.
English, Albanian, Arabic, Armenian, Assamese, Azerbaijani, Basque, Belarusian, Bengali, Bulgarian, Burmese, Cambodian, Catalan, Croatian, Czech, Danish, Dutch, Estonian, Filipino, Finnish, French, Galician, Georgian, German, Greek, Gujarati, Hebrew, Hindi, Hungarian, Icelandic, Indonesian, Irish, Italian, Japanese, Kannada, Kazakh, Kirghiz, Korean, Laotian, Latvian, Lithuanian, Macedonian, Malay, Malayalam, Marathi, Mongolian, Nepali, Norwegian Bokmål, Oriya, Persian, Polish, Portuguese, Punjabi, Romanian, Russian, Serbian, Simplified Chinese, Singhalese, Slovak, Slovenian, Spanish, Swedish, Tajik, Tamil, Telugu, Thai, Traditional Chinese, Turkish, Turkmen, Ukrainian, Urdu, Uzbek, Vietnamese
- Age Rating
- This app may use your location even when it isn't open, which can decrease battery life.
- © 2017 Samsung Electronics Co.,Ltd
With Family Sharing set up, up to six family members can use this app.